Soil

• AZA 0908 Lateral Pressure Assembly 10kg/cm²: Applies precise lateral (confining) pressure.
• Designed for use with triaxial cells to simulate in-situ soil conditions.
• Maximum pressure capacity of 10 kg/cm².
• Includes a robust pressure chamber, calibrated pressure gauge, and foot pump.
• Essential for accurate triaxial shear strength testing of soils.
• Facilitates compliance with IS, ASTM, and BS standards for triaxial tests.
• Durable construction for reliable laboratory performance.

Features: ! Two pillar type ! Detachable Frame ! Enclosed motor and gear system ! Jewel lamps indicating direction of motion ! Operational ease ! Useful for Triaxial and CBR Tests The Load Frame consists of a cabinet which houses the gear system and motor with sturdy angle iron frame. the loading is done through the bottom loading platen, which is carried on a lead screw, which advances upwards. the top load bracket, which slides over two upright pillars, can be positioned at any desired height and locked. It carries a screw adapter for standard Proving rings and Load Cells. The loading part of the unit is detachable from the main unit for ease of transport and to avoid damage to the tension rods. Rates of Strain: 30 fixed speeds between 0.00048 mm/min and 6.00 mm/min. Suitable for operation on 220 V, 50 Hz, single phase, AC supply.

• AZA 0912 Motorised Lab CBR Apparatus: Standard, precise lab equipment for CBR testing.
• Motorized loading frame ensures consistent 1.25 mm/min penetration rate.
• Uses a calibrated proving ring with dial gauge for load measurement.
• Features a separate dial gauge for accurate penetration depth readings.
• Includes standard CBR moulds, spacer disc, and surcharge weights.
• Complies with IS 2720 Part 16, ASTM D1883, and BS 1377-4.
• Essential for pavement design and quality control in road and airfield construction.
• Provides reliable and reproducible results for soil bearing capacity.

• AZA 0913 Automatic CBR Test Apparatus: Fully automated lab system for CBR testing.
• Ensures precise 1.25 mm/min penetration rate with motorized frame.
• Utilizes high-resolution load cell and displacement transducer for data.
• Advanced software for real-time graphing, automatic calculation, and reporting.
• Significantly enhances accuracy, reproducibility, and efficiency over manual methods.
• Complies with IS 2720 Part 16, ASTM D1883, and BS 1377-4.
• Essential for pavement design and quality control in road and airfield construction.

Augers are used to collect disturbed soil samples at reasonal depths for laboratory tests. Augers are available in two types and each in different sizes. Blade type (posthole type) and helical type (screw type). Each auger outfit consists one each of auger head, one meter long rod, tee piece and handle. Depth of excavating can be increased using additional extension rods. AZA 0916A AUGER POSTHOLE TYPE (a) 50mm (b) 75mm (c) 100mm dia (d) 150mm dia AZA 0916B AUGER SCREW TYPE (a) 25mm (b) 38mm (c) 50mm (d) 75mm (e) 100mm (f) 150mm (g) 200mm (h) 250mm (i) 300mm dia Extras : Extension rod 1 meter length with threading at both ends and couplings, set of two spanners and tee piece.

AZA 0917A UNRELIEVED (a) 150mm (b) 200mm (c) 225mm (d) 300mm long. AZA 0917B RELIEVED (a) 150mm (b) 200mm (c) 225mm (d) 300mm long. AZA 0917C SAMPLING OUTFIT (HEAVY DUTY) Undisturbed samples of soil at different depths can be collected using these sampling tubes. The kit includes all necessary impletments for boring. Collection and sealing with wax. The operation may be carried out either using a tripod stand or without it. The equipment is supplied in a canvas bag. Specification: 150mm auger blade type, complete with handle 'T' piece and 1 mtr. long rod 1 no. Extension: 1mtr. Long and 37.5mm diameter 5 nos. Jarring link (large) for driving samplers 50mm, 100mm or 150mm dia. This can be connected to the sampler or to the extension rod. One eye hook, one wax container, one methylated spirit stove, one wax ladle, and one pair spanners complete in carrying case. Accessories: Samplers for undisturbed sampling are available in different sizes. These are used with sampling outfit. Each sampler is 45cm long is supplied complete with two end caps, cutting nose. Driving head with air outlet valve and 3 nos. C-spanners . Sampler are available in 50mm dia, 100mm dia & 150mm dia. Thin walled samplers are also available in diameter 50mm, 75mm and 100mm. Each sampler is 60cm long and its cutting edge is hardened. These samplers can be used with sampling outfit 'a' drill rods by using suitable adoptors.