Rock
Aggregate
Cement
Concrete
Soil
Steel
Bitumen/Asphalt
Security Survey Equipment
General Items
AZA 0788 VICAT NEEDLE APPARATUS WITH DASHPOT
IS 4031, 2645, 2542 (PART-1), 1727, 5513 & 712. BS 12, 146, 915, 1370, 4027, 4246, 4248, AASHTO T 129, E 131.
This instrument is used for determining the normal consistency and setting times of cement and ‘A’ class limes.
Specification:
The apparatus consists of a metallic frame bearing a freely movable and with a cap at top, one vicat mould and glass base plate and one set of needles one each initial needle, final needle and consistency plunger. It comes with a dashpot which facilities gentle lowering of the needles.
Accessories:
Mild steel base plate 5 inches x 5 inches.
Fulcrum MOULD, brass,80mm i.d. base dia x 70mmi.d.top dia, 40mm height.
Note
Normally set of needles and mould which meet is Requirements as per I.S. 5513 are supplied. While ordering please specify the specification code of the instrument required.
Vicat needle apparatus for determining consistency of hydraulic cement. Gypsum plaster, lime etc.
As per ASTM C 187-58 C 472-62 C 110-58, IS 2542 (Part-1) can also be supplied.
Related products
AZA 0787 BLAINE’S AIR PERMEABILITY APPARATUS
IS 4031, 5516, 1727 & 4828, ASTM C-204, BS 4359-2
Specification: Designed to find out specific gravities of semi liquids like mud and other liquids having densities in the range 0.8 to 2.5. It has a stainless steel bam calibrated specific gravities from 0.8 to 2.5. A stainless-steel cup with lid and overflow vent is fitted on one side of the beam. A counter weight with cursor slides over the graduated scale. The beam has a knife-edge at center which rests in a fulcrum fitted in the stand. Leveling screws and spirit level are fitted to the stand.
Spares & Accessories (On Extra Cost):
Punch to cut filter paper discs. Non-perforated disc. Suction bulb, Mercury.
AZA 0795 LE CHATELIER MOULD
AZA 0796 LE CHATELIER FLASK
AZA 0800 LABORATORY CEMENT AUTOCLAVE
AZA 0802 DIGITAL BLAINE AIR PERMEABILITY APPARATUS
AZA 0803 TENSILE STRENGTH TESTER (ELECTRICALLY OPERATED)
AZA 0810 FULLY AUTOMATIC MORTAR MIXER
EN 196-1, 196-3, 413-2, 459-2, 480-1, 1015-2, 12617-4; ASTM C187, C305; AASHTO T129, T131, T162
The mixer has been designed to mix mortars and cement pastes primarily to the requirements of standards. The mixing paddle has a planetary motion and is driven by a motor with a microprocessor-based speed and preset programs to meet all listed EN and ASTM standards, custom designed programs or manual mode. The mode button is used for the fast selection of different programs. The mixing paddle revolves at a rate of 140 rpm. with a planetary motion of 62 rpm. in low speed. In high speed, the paddle revolves at the rate of 285 rpm. with a planetary motion of 125 rpm. An automatic sand dispenser is supplied with the machine and the sand is automatically discharged. Custom design allows 6 programs to be set by the operator, where the motor speed, sand dispenser position and duration of the mix can be set. For the mix where the motor speed is selected as zero, the bowl can be lowered without interrupting the rest of the program. On the display the user can see the mix time and the machine is equipped with lamp in order to warn the user for critical time periods.
The Automatic Programmable Mortar Mixer is supplied complete with:
Bowl: 5 lt (approx.) Beater
Dimensions: 300 x 555 x 610 mm
Weight (approx.): 56 kg Power: 200 W
