Rock
Aggregate
Cement
Concrete
Soil
Steel
Bitumen/Asphalt
Security Survey Equipment
General Items
AZA 0821 WET SIEVING APPARATUS
EN 451-2
The wet sieving apparatus is used for determining the fineness of fly ash. The apparatus comprises of a special stainless steel sieve, 0.045 mm opening, a spray nozzle ø 17.5 mm with 17 holes ø 0.5 mm oriented and spaced to conform to the standards. Supplied complete with a pressure gauge ø 80 mm and fittings for connection to the water supply.
Category: Cement
Related products
AZA 0791 FLOW TABLE
IS:6932 (PART VIII), ASTM C 230, BS 4551:1
Flow Table is used for determining the work-ability of building limes.
Specification:
The flow table consists of a 30 cm dia polish steel plate with 3 engraved annular circles 7, 11 and 19cm dia. The table top is arranged for a free fall of 12.5mm by a cam action. Supplied complete with one brass conical mould, 65mm i.d. at base and 40mm i.d. at top, height of the mould 90mm.
AZA 0794 FLOW TABLE (MOTORISED)
AZA 0797 SHRINKAGE BAR MOULD
IS 4031, 10086, ASTM C 227. & BS 1881.
The mould is used for casting specimens of cement & aggregate combinations for measuring the potential expansive alkali reactivity. Size of the mould is 25 x 25 x 282 mm and effective size is 25 x 25x 250 mm.
Available Models:
AZA 0797-A - Shrinkage Bar Mould - One Gang (One Compartment)
AZA 0797-B Shrinkage Bar Mould-Two Gang (Two Compartment)
AZA 0797-C Shrinkage Bar Mould - Three Gang (Three Compartment)
AZA 0797-D Shrinkage Bar Mould - Four Gang (Four Compartment)
AZA 0799 VOLUME CHANGE APPARATUS
ASTM C 490, IS 4031 & BS 1881.
The instrument is used for determining the volume change of cement concrete.
Specification:
The apparatus comprises of one mould effective gauge length complete with base plate, four reference pins, one length comparator frame, one stainless reference bar with insulated grip, and one dial gauge, 0.002mm x 5mm
AZA 0800 LABORATORY CEMENT AUTOCLAVE
IS 4031-1968, IS 1624-1960 & ASTM C 151, C 141
Specification:
The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless-steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 10.5 cm diameter x 40.5cm height suitable for operation on 230 V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature.
Note: Ordinary laboratory cement autoclave with mild steel chambers are also available.
AZA 0804 BRIQUETTE MOULD (SINGLE)
IS 269 1958, BS12
Specification:
For casting of cement briquettes for tensile strength tests. It is a two part split mould made of gun metal. Two thumb screws facilitate easy and quick assembling and dismantling of the mould. The minimum cross section of the briquettes cast is 25.4 mm x 25.4 mm. Supplied complete with a steel base plate.
AZA 0806 STANDARD SPATULA
