Rock
Aggregate
Cement
Concrete
Soil
Steel
Bitumen/Asphalt
Security Survey Equipment
General Items
AZA 0865 HEAVY COMPACTION TEST
ASTM D 558, D698
Specification:
The apparatus consists one each of compaction mould
steel, 152.4mmI.D. x 116.4mm height x 2124 cc.
volume, complete with collar and base plate
Compaction Rammer is 4.5 kgs. in weight x 18”
controlled fall. Face of the rammer is 2”
Category: Soil
Related products
AZA 0848 PLASTIC LIMIT SET
IS 2720 (PART-VII) ASTM D-42, BS 1377 AASHTO T 90 Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled in to a thread of 3mm dia.
Specification:
The complete set consists of one each:
1. Glass plate 20cm x 15cm having round ends
2. Brass or stainless steel rod 3mm dia x 150mm long
3. Flexible spatula 15 cm
4. Set of 6 moisture containers
5. Porcelain basin 150mm dia
6. Plastic wash bottle 500ml
Note: Glass Plate size 500 x 500 x 10mm can be supplied at an extra cost
AZA 0858 SOIL HYDROMETER
IS 2720 (PART-VI),BS 1377-2
Specification:
Used for grain size analysis of soils where more than 10% of the material
will pass through 75 microns B.S. sieve. Manufactured from clear
transparent glass having uniform clarity throughout the upper end on which
density scale is engraved. The scale range is 0.995 to 1.030 density
(gms./cc) at 270C smallest division on the scale is 0.0005.
Note: Hydrometer for other liquids also available.
AZA 0860 METHYLENE BLUE TEST SET
EN 933-9; NF P94-068; UNE 83 180; UNI 8520-15
The test set is used for determining the methylene blue value of
0/2 mm/ fraction in fine aggregates.
AZA 0860A Methylene Blue Test Set, 210-240 V 50-60 HZ
AZA 0860B 1 Filter Paper For Methylene Blue Test
Ø:125 mm, 100 Pcs./Pack
Set consists of
! High speed agitator motor, 400/600 r.p.m.
! Stirring propeller, ø 70 mm 4 flanks
! Glass burette, 50 ml x 0.1 ml
! Burette holder and stand
! Filter paper, 1 pack (100 pcs.), 125 mm dia, 95 g/m2,
0.20 mm thickness
! Glass rod, ø 8x300 mm
! Plastic beaker, 1000 ml
! Methylene blue, 100 g
! Kaolinite, 500 g
AZA 0866 HEAVY COMPACTION TEST
IS 2720 (PART-VIII)
Specification:
Instrument consists one each of compaction
mould steel 150 mm I.D. x 127.3mm height
volume 2250cc. Complete with collar and
base plate. Compaction Rammer is 4.89
kgs. in weight x 450 mm controlled fall.
Note : Instead of steel moulds, gunmetal
mould are also available.
AZA 0867 AUTOMATIC SOIL COMPACTOR
BS 1377:4
Automatic Soil Compactor BS EN Rammer the
automatic soil compactors is designed to provide a
fully automatic uniform compaction of standard /
modified and CBR specimens assuring conformity with
the reference standard.
Compactor is equipped with programmable digital
counter which allows machine to stop at the preset
numbers of blows. The height and weight of the rammer
is adjustable to suit test requirements. The drop weight
is adjustable to 300 mm drop height and is also
adjustable to 450 mm drop height. The rammer is
circular faced with a 50 mm diameter and is adjustable
to 2.5 kg. or 4.5 kg.
An automatic blow pattern ensures effective
compaction for each layer of soil and the rammer
travels across the mould. The table rotates the mould in
equal steps and the number of blows per layer can be
set at the beginning of the test by the digital counter.
User defined blow number and in-out distribution is
also available.
A standard proctor / CBR switch, emergency stop and
start push buttons are located beside the blow counter.
220 V, 50-60 Hz, 1 Ph
AZA 0869 POCKET PENTROMETER
ASTM D 1558 D 2573
This instrument is used to estimate approximate unconfined
compressive strength and the estimation to shear strength of soil
Cohesive soils can also be classified in terms of consistency
using this Penetrometer. This is a handy and convenient
instrument.
Specification:
It consists of a light weight barrel assembly with a polished and
ground steel loading piston plunger. A direct reading scale is
engraved on the piston barrel and indicates load in kg. / sq.
cm. A maximum load indicator ring is provided on the
penetration plunger. The calibrated spring is heat treated and
plated for rust resistance. The barrel diameter is 20mm and the
length 150mm. Supplied with carrying case
AZA 0870 VICKSBERG PENTROMETER (PROVING RING TYPE)
This is fork determining the bearing capacity of sub grades or
for compaction control. It also used for rapidly of soils in
shallow exploration work.
Specification:
Consists of a study handle under. Which is fixed a sensitive
proving ring. An extension piece is fixed to the bottom of the
proving ring and carries a detachable penetration cone at its
tip. Proving ring capacity 100 kg (1kn) and 0.002mm dial
gauge provided indicates the penetration load applied.
An optical viewer is provided to facilitate reading the dial
gauge by the operator. Simplified for single person operation.
A calibration chart is provided for the proving ring. Instrument is
complete in a wooden carrying case.
AZA 0872 DYNAMIC CONE PENETROMETER
A simple and robust instrument for rapid in-situ measurement of the structural properties of road pavements
! Provides fast and efficient method of obtaining information
! For continuous measurements up to a depth of 800 mm and 1,200 mm with the extension rod.
! Portable and can be accommodated in a carrying case
for pavement design. Agreement is generally good over most of the range but differences are apparent at low values of
CBR, especially for fine grained materials.
It incorporates a 8 Kg weight dropping through a height of 575 mm and a 60 deg. cone having a diameter of 20 mm.
It is supplied complete with assembly tools and weighs 20 Kg approx.
The DCP needs three operators, one to hold the instrument, other to raise and drop the weight and a technician to
record the results. The instrument is held vertically and the weight carefully raised to the handle limit and then allowed
to fall onto the anvil.
The equipment consist of the following replaceable parts
AZA 0872A Top and Bottom Rod
AZA 0872B Handle
AZA 0872C Hammer
AZA 0872D 1m Scale
AZA 0872E 60 deg. Cone
AZA 0872F Anvil
