Rock
Aggregate
Cement
Concrete
Soil
Steel
Bitumen/Asphalt
Security Survey Equipment
General Items
AZA 0877 UNIVERSAL PERMEABILITY
IS 2720 (PART XVII)
Specification:
Same as AZA 0876 but instead of a set of three glass stand
pipes a stand with nine glass tubes of 6mm, 10mm,
20mm, 25mm, 40mm, 50mm, 60mm, 70mm, 75mm,
bore tube is provided with over flow arrangement for
constant head tests. The remaining tubes are used for
falling head test.
Category: Soil
Related products
AZA 0849 SHRINKAGE LIMIT SET
IS 2720 (PART-VII) ASTM D 427, BS 1377, AASHTO T 92. Shrinkage limit is the maximum water content at which a reduction in water content does not cause an appreciable reduction in volume of the Soil Mass. At shrinkage limit, on further reduction in water, air enters in to the voids of soils and thus keeps the volume constant.
The apparatus can be used to determine shrinkage limit and to calculate other shrinkage ratio, shrinkage index and volumetric shrinkage.
Set consists of one each:
1. Porcelain evaporating dish
2. Shrinkage dish
3. Glass cup
4. Perspex plate with three metal prongs
5. Flexible spatula 100mm
6. Glass cylinder
7. 25ml x 1ml, supplied without mercury
6. Plastic wash bottle 500ml
Optional Accessories:
Mercury supplied in bottle of 500 gms. at an extra cost.
AZA 0850 LINEAR SHRINKAGE MOULD
AZA 0854 LIQUID LIMIT DEVICE (MOTORISED)
AZA 0858 SOIL HYDROMETER
IS 2720 (PART-VI),BS 1377-2
Specification:
Used for grain size analysis of soils where more than 10% of the material
will pass through 75 microns B.S. sieve. Manufactured from clear
transparent glass having uniform clarity throughout the upper end on which
density scale is engraved. The scale range is 0.995 to 1.030 density
(gms./cc) at 270C smallest division on the scale is 0.0005.
Note: Hydrometer for other liquids also available.
AZA 0859 SAND EQUIVALENT TEST SET
ASTM D 2419, AASHTO T 176
Specification:
Used to determine the relevant proportions of clay-like or Plastic
fines and dust in granular soils & fine aggregate
Consists of:
1. Acrylic graduated cylinder (4 nos.)
2. Rubber stopper for cylinder (4 nos.)
3. Graduated Steel rule 450 mm
4. Funnel 100 mm plastic
5. Aspirator bottle 5 lts plastic with rubber cock
6. Stand for the aspirator bottle with siphon assembly
7. Irrgation tube with stop pinch cock & weighted foot assembly
Optional : Stock solution can be supplied at an extra cost
AZA 0861 MOTORISED SAND EQUIVALENT SHAKER
AZA 0863 STANDARD COMPACTION TEST
AZA 0867 AUTOMATIC SOIL COMPACTOR
BS 1377:4
Automatic Soil Compactor BS EN Rammer the
automatic soil compactors is designed to provide a
fully automatic uniform compaction of standard /
modified and CBR specimens assuring conformity with
the reference standard.
Compactor is equipped with programmable digital
counter which allows machine to stop at the preset
numbers of blows. The height and weight of the rammer
is adjustable to suit test requirements. The drop weight
is adjustable to 300 mm drop height and is also
adjustable to 450 mm drop height. The rammer is
circular faced with a 50 mm diameter and is adjustable
to 2.5 kg. or 4.5 kg.
An automatic blow pattern ensures effective
compaction for each layer of soil and the rammer
travels across the mould. The table rotates the mould in
equal steps and the number of blows per layer can be
set at the beginning of the test by the digital counter.
User defined blow number and in-out distribution is
also available.
A standard proctor / CBR switch, emergency stop and
start push buttons are located beside the blow counter.
220 V, 50-60 Hz, 1 Ph
