Rock
Aggregate
Cement
Concrete
Soil
Steel
Bitumen/Asphalt
Security Survey Equipment
General Items
AZA 1010 TORSION TESTING MACHINE
It is designed for conducting Torsion and Twist Tests on various metal wires, tubes sheet materials. Torque measurement is by Pendulum dynamometer System. Torque ranges can be adjusted. Torque is applied to specimen by geared motor through gear box. Autographic recorder can be provided to know the relation between torque and angle of twist on specific request. The Accuracy of the torque indication is ± 1% of the true torque. The complete system is hydraulicly damped for vibration free Loading. Unique ‘TALON-CLAW’ Grips for Round and Flat specimens
! Torsional Speed of 0.1/0.2 RPM
! Torque Compensated Motors
! Maintenance Free Gear Box
! Auto Range Selection with Range Selector Wheel (Optional)
! 3 or 4 Torque Ranges for Higher Accuracy (Optional)
! Load-unload Capability
! Variable Speed Drive (Optional)
Category: Steel
Related products
AZA 1009 HYDRAULIC COMPUTERIZED UTM
Application System:
! Peak load along with on line load
! Maximum elongation with online elongation
! Ultimate Tensile Strength
! Graphical Display of Load vs. Time
! Graphical Display of Elongation vs. Time
! Graphic Display of Load vs. Elongation
! Graphic Display of Stress vs. Strain
! Complete Statistical Analysis
! Data Report Management
Safety Features:
! Machine stops after specimen failure
! Safety against Over travel of piston
! Safeguard against
! High temperature
! Surge Protector
! Auto Machine Diagnosis
! Safety against overload
PC Configuration:
! Processor: Quad Core processor from Intel / AMD
! Processing Speed: 2.0 GHz or higher
! Hard Disk Drive: 250 GB or higher
! RAM: 4 GB
! DVD Writer
! Colour Monitor: 17" LED TFT
! Key Board: 104 Key
!
AZA 1012 BRINELL HARDNESS TESTER
The machine is designed with a Hydraulic Power pack and control circuit for
effortless loading unloading operation. A dial gauge in front measures depth
of ball penetration. This facilitates production testing within tolerance limits by comparison method.
Standard Accessories
! Model Capacity 3000 Kgf PMT 3
! Testing Table 200 mm ø 1 pc.
Testing Table 200 mm ø with 'V' grove
! For round jobs-l0 to 80 mm dia 1 pc.
! Ball holder 5 mm 1 pc.
! Ball holder l0 mm 1 pc.
! Test Block HB-5/750 1 pc.
! Test Block HB-l0/3000 1 pc.
! Brinell Microscope 1 pc.
! Allen Spanner 1 pc.
! Telescopic cover for elevating screw protection 1 set
! Instruction Manual 1 book
AZA 1013 CHARPY IMPACT TESTER
Designed for conducting CHARPY, 1Z0D and IMPACT TENSION Tests. The test methods confirm to IS 1757-1961, IS 1499-1959 and BS 131 Part 2 % 3, IS 1598-1960, BS 131 (Part 1) and ASTM E 32-47T.
The impact energy absorbed by the specimen during rupture is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read on the dial scale.
Salient Features:
! Release of Pendulum by Hand operation
! Safety guards for Protection
! Braking Arrangement provided to arrest the swing of pendulum after specimen rupture Capacity 30 KgM / 300 Joules
AZA 1014 FATIGUE TESTING MACHINE
Application & Operation
This machine is used to test the fatigue strength of materials and to draw S-N diagram ideal equipment for Technical Institutions, Research Institutes, Laboratories etc. This is a rotating beam type machine in which load is
applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment. The specimen is rotated at 4200 RPM by a motor. A complete cycle of reversed stresses in all fibers of the specimen is produced during each revolution. The bending moment is applied with a lever system and can be easily changed by moving a weight over the lever. Total number of revolutions at which the specimen fails are recorded by a mechanical counter. An interlocking system puts off the motor at specimen failure. Machine meets requirements of International / Indian Standards
Features
! Light weight, compact size, simple design
! Table model, no need of foundation
! Simple lever system for changing load
! Accurately calibrated as per IS 5075
! Calibration in Nm available on request 8 digit electronic counter instead of
mechanical counter can be supplied at additional price and the model is
termed as FTG-8 (D). Machine with maximum bending moment upto 400 kg cm can be offered on request.
AZA 1015 TENSILE TESTING MACHINE
Floor mounted, vertical type, two column construction specially
manufactured for various applications.Tensile Testing Machines are designed for determining the Tensile Strength and Elongation of a host of materials like ferrous and non ferrous materials, cables & conductors, Plastic, PVC, Rubber specimens, paper, plywood etc. Our Tensile Testing Machines are also capable for conducting compression, Cross breaking and Shear tests thus making them more versatile with a few additional attachments. Tensile Testing Machines are available in various capacities depending upon the requirements right from 5 kgf to 10 Tonnes ensuring ± 1% accuracy in test results. We assure high accuracy, sensitivity, reliability, consistency, repeatability and excellent workmanship. Tensile Testing Machines are backed up by prompt and effective after service by a team of factory trained technicians. Our machines are available in KGF/ kN/N as per your specific requirements.
Tensile Testing Machines are also available with State of Art Electronic
Microprocessor based Digital Indicator systems with PC and Printer.
Horizontal Models and Computerized versions are also in our range of production
AZA 1016 METALLURGICAL INVERTED MICROSCOPE
Magnification Range: 20x to 400 x (Standard) 0
Observation Head: Binocular 45 with interpupillary and diopter
adjustment
Stand: Sturdy and Durable pressure Die cast Aluminium stand.
Mechanical Stage: Co-Axial low drive double plate mechanism system
travel on ball bearing guide ways.
Focusing System: Co-axial coarse & fine mechanism system with ball
bearing guide ways.
Epi-Illumination: Built in base 12V-50W Halogen lamp with light intensity control system.
Quadruple Nose Piece: A precision mechanism ensures the accuracy and
optical alignment of the system.
Filters: Green & Blue.
DIN-LWD Objectives: M4 x M10x, M20x & M40x (SL). Anti Fungal & infinity
corrected.
Eye Pieces: 5x & 10x Paired. Extra wide field, Anti fungal & Anti reflected
AZA 1017 DOUBLE DISC POLISHING MACHINE
This is double disc polishing machine for met allographic samples. Two
independent polishing units is mounted on a common MS frame, other
specification as per single disc. This Machine is portable model for
polishing of met allographic sample. Disc dia 200 mm made of Aluminum.
Speed continuously variable up to 950 RPM. Rating- 0.25 HP single phase
220 Volt A.C. Provided with sink and swing type laboratory water tap.
Water proof Formica table top
AZA 1018 SPECIMEN MOUNTING PRESS
- Automatic Mounting Press designed for metallographic specimen preparation.
- Suitable for all thermosetting materials due to integrated cooling system.
- Automatically controls heating temperature, holding time, and acting force.
- Operator can select from 4 specification patterns to accommodate various specimen types.
- Capable of producing 2 specimens simultaneously.
