Rock
Aggregate
Cement
Concrete
Soil
Steel
Bitumen/Asphalt
Security Survey Equipment
General Items
AZA 1155 CUBE MOULD, PLASTIC
This high-density polyethylene three-gang mold for 50 mm cubes strips and reassembles easily. Set comes complete with tamper and mold top. Offers substantial cost savings
Category: Concrete
Related products
AZA 1101 VEE BEE CONSISTOMETER
IS 1199 & BS EN 12350
The instrument is used for workability as well as consistency of fresh concrete. A slump Cone and a graduated rod supplied with the instrument helps the operator to find out slump values and vibration table with container and acrylic disc is used to find out workability of concrete expressed in Vee Bee degrees, which is defined as the time in seconds to complete required vibrating at which the fresh concrete flows out sufficiently to come in contract of the entire face of acrylic disc. Specification:
The equipment consists of : A vibrating table size 380 mm long and 260 mm wide, resting upon elastic support at a height of about 305 mm above the floor, complete with Start/Stop switch, cord and plug.
A holder is fixed to the base in to which a swivel arm is telescoped with funnel and guide swivel arm is also detachable from the vibrating table. The divisions of scale on the rod record the slump of the concrete in millimeters. Supplied complete with a sheet metal container with lifting handles which can easily be fixed to the vibrating table. A slump cone open at both ends with lifting handles and a tamping rod of size 16 mm dia and 600 mm long rounded at both ends.
AZA 1105 CHASE AIR INDICATOR
AZA 1108 INITIAL SURFACE ABSORPTION TEST (ISAT) APPARATUS
BS1881 PART 208
This apparatus is used to assess the surface absorption characteristics of concrete.The rate of flow of water per unit area into a concrete surface when subjected to a constant head of 200mm is measured. The unit consists of a capillary tube mounted on a scale, a water reservoir & connecting tube. Easy to use, mounted on a stand
AZA 1109 J-RING, NARROW GAP
EN12350-12
The J-Ring test is used for determining the passing ability, the flow spread and the flow time of self compacting concrete as the concrete flows through the J- Ring apparatus. The J-Ring narrow gap with ø18 mm x 16 smooth bars is manufactured from stainless steel.
The Slump Cone is made from sheet steel protected against corrosion, with diameters; top 100 mm, base 200 mm and with a height of 300 mm.
The Base plate is 900x900x3 mm square, made of stainless steel with engraved circles of 200 mm and 500 mm diameter conforming to EN 12350- 8.
The Steel weighted collar is used to stabilize the slump cone on J-Ring or slump flow tests.
Minimum apparatus for the J-Ring test are J-Ring with narrow gap and
slump cone.
AZA 1109 J-Ring, narrow gap
AZA 1109 A Slump cone for J-Ring
AZA 1109 B Base plate for J-Ring and slump-flow tests
AZA 1109 C Steel weighted collar, 9 kg
AZA 1109 D EN 12350-8 for slump cone on J-Ring or slump flow test
AZA 1112 L SHAPE BOX APPARATUS
EN12350-9
The L Shape box is used for determining the passing ability rate of freshly mixed self compacting concrete. The distance between 12 mm diameter bars can be set between 41±1 mm or 59±1 mm. L Shape box is designed for ease of cleaning the vertical and horizontal hoppers.
The l shape box apparatus is supplied complete with:
! Filling Hopper
! Base
AZA 1114 POCKET CONCRETE PENETROMETER
ASTMC-403
For fast evaluation of the initial setting of concrete. It can be used on light weight concrete, special roof deck mixes and concrete additives.
Specification:
Consists of a needle having face area 3/10 sq. cm. and graduated at a distance of 25 cm. The needles point is an integral part of barrel which houses a calibrated spring. The spring is confined in a sleeve.
The resistance offered by the concrete mortar is shown on the direct reading scale with a marker ring which holds its position when released. Scale range is 0-50 kg/cm2 when the penetration resistance reaches a value of 35kg/cm2 the concrete is assumed initially set.
Supplied complete in carrying case.
AZA 1118 LABOMIX CONCRETE PAN MIXER
The right choice for the demanding professional user. Here you get the best value for money without making any compromises on the well-known ACCURATE virtues. Quality, durability and efficiency completely lives up to even the highest demands.
Features:
Large motor with plenty of power
High quality & finish
Exchangeable mixer shovels
Automatic emptying of the container
Large transport wheels make it easy to load the mixer
Easy to clean
Positioning bolt secures the cover during use/transport
Can be operated by one man
Maintenance free high-quality gear
Model AZA 1118A AZA 1118B AZA 1118C AZA 1118D
Motor (KW) 1.1/1.1 1.5/1.5 2.2/1.8 4.0
Currency (V) 1x240 1x240 3x440 3x440
Gear/RPM 32 32 32 32
Container capacity (L) 90 120 200 300
Mixing capacity (L) 74 90 160 250
Mixing capacity (KG concrete) 174 211 376 587
Dimensions (WXDXH)(mm) 640x800x107 640x800x107 780x105x116 100x142x122
Weight (KG) 80 90 180 245
