PORE PRESSURE APPARATUS 20 KG/CM² AZA0905 - Image 1
Click to enlarge
PORE PRESSURE APPARATUS 10 KG/CM² AZA0904
PORE PRESSURE APPARATUS 10 KG/CM² AZA0904
Back to products
Volume Change Gauge, Soil Volume Measurement, Triaxial Test Equipment, Pore Water Displacement
VOLUME CHANGE GAUGE AZA0906

PORE PRESSURE APPARATUS 20 KG/CM² AZA0905

The AZA0905 Pore Pressure Apparatus from Azalab is a high-capacity, precision instrument designed for accurate measurement of pore water pressure in saturated soil specimens during laboratory geotechnical testing. With a maximum operating pressure of 20 kg/cm² (≈2000 kPa / 2 MPa), the AZA0905 is suitable for a wide range of soil conditions, including high-stress research applications and routine engineering investigations.

Accurate pore pressure measurement is fundamental to determining effective stress, which governs soil shear strength, compressibility, and permeability. The AZA0905 is therefore a critical component in triaxial, consolidation, and permeability testing, enabling engineers and researchers to generate reliable parameters for safe and economical geotechnical design.

View Specification PDF
Enquiry on WhatsApp
Category:
Description

Description

Applications

The AZA0905 Pore Pressure Apparatus is essential for:

  • Triaxial compression testing (UU, CU, CD)

  • Consolidation testing and settlement analysis

  • Soil permeability studies

  • Measurement of excess pore water pressure

  • Effective stress and soil behavior research

By enabling precise monitoring of pore pressure generation and dissipation, the AZA0905 directly supports foundation design, retaining structure analysis, slope stability studies, and earthwork engineering.

Construction & Features

The apparatus is manufactured from high-quality, corrosion-resistant materials to ensure durability and long-term accuracy in laboratory environments. Key features include:

  • High-precision pressure gauge or digital pressure transducer

  • Measurement range up to 20 kg/cm²

  • Integrated de-airing system for proper saturation of lines and porous stones

  • Control valves and high-quality tubing for leak-free operation

  • Compatible fittings for connection to triaxial cells, consolidation, and permeability setups

  • Compact bench-top design for convenient laboratory use

The reliable construction and ease of operation minimize setup time while ensuring repeatable and accurate pore pressure measurements.

Standards & Compliance

The AZA0905 is designed to support testing in accordance with major international standards, including:

  • ASTM D4767 – Consolidated Undrained Triaxial Compression Test

  • ASTM D2850 – Unconsolidated Undrained Triaxial Test

  • BS 1377 Part 7 – Triaxial Shear Tests

  • IS 2720 (Part 11) – Determination of Shear Strength Parameters

Key Benefits

  • Measures pore water pressure up to 20 kg/cm² (2000 kPa)

  • Essential for effective stress evaluation in geotechnical analysis

  • High accuracy and repeatability for research and commercial labs

  • Robust, corrosion-resistant construction

  • Compatible with standard laboratory triaxial and consolidation systems

Specifications – AZA0905 Pore Pressure Apparatus

Feature Specification
Model Number AZA0905
Measurement Type Pore Water Pressure
Maximum Pressure Capacity 20 kg/cm² (≈2000 kPa / 2 MPa)
Pressure Measurement Dial Gauge or Digital Pressure Transducer
Components Included Pressure gauge/transducer, de-airing system, valves, tubing, porous stones, fittings
Material Construction Brass / Stainless Steel with durable plastic components
Compatibility Triaxial cells, consolidation apparatus, permeability test setups
Accuracy High-precision measurement for geotechnical applications
Mounting Laboratory bench-top
Application Advanced soil mechanics and geotechnical testing

Frequently Asked Questions (FAQ)

Q1: What is the primary function of the AZA0905?
A1: It accurately measures pore water pressure in saturated soil samples during triaxial, consolidation, and permeability tests.

Q2: What is the maximum pressure capacity of the AZA0905?
A2: The apparatus measures pore pressure up to 20 kg/cm² (approximately 2000 kPa).

Q3: Is the AZA0905 compatible with standard triaxial systems?
A3: Yes, it is designed to integrate with most standard laboratory triaxial cells and soil testing setups.

Q4: Why is pore pressure measurement critical in soil testing?
A4: Pore pressure data is required to determine effective stress, which controls soil shear strength, compressibility, and hydraulic behavior.

Q5: Does the apparatus require calibration?
A5: Periodic calibration of the pressure gauge or transducer is recommended to maintain accuracy.

Q6: What maintenance is required?
A6: Routine checks for leaks, proper de-airing of lines, cleaning of components, and inspection of valves and tubing.

Q7: Is the AZA0905 suitable for field use?
A7: No, it is designed for controlled laboratory applications. Field measurements typically require piezometers.

Additional information

Additional information

Product Model

AZA 0905
Measurement Type

Pore Water Pressure
Maximum Capacity

20 kg/cm² (2 MPa)
Weight

(Approximate, e.g., 5 kg – PLEASE PROVIDE)
Construction Material

(e.g., Corrosion-resistant alloys, high-grade plastics – PLEASE SPECIFY KEY MATERIALS)

Related products

GRAIN SIZE ANALYSIS (PIPETTE METHOD) AZA0856

The AZA0856 Grain Size Analysis (Pipette Method) Apparatus from AZA Lab is a precision testing setup used for determining the distribution of fine soil particles such as silt and clay. It is widely used in geotechnical engineering, civil construction quality control, soil mechanics research, and academic laboratories, particularly where conventional sieve analysis is ineffective for particles finer than 75 microns. This apparatus is designed for the mechanical analysis of sub-sieve soil particles, expressing quantitatively the proportion by weight of various particle sizes present in a soil sample. The pipette method, based on sedimentation principles and Stokes’ Law, provides accurate and repeatable results for fine-grained soils. The system consists of a sliding vertical panel operated by a precision screw mechanism, allowing an Anderson pipette to be raised or lowered accurately. A sedimentation tube is held securely below the pipette using a laboratory clamp. The depth of immersion is measured using a millimeter-graduated scale mounted alongside the sliding panel. The apparatus is supplied complete with a 10 ml Anderson pipette, a 500 ml glass sedimentation tube, and test form pads, conforming to standard laboratory practices.
Read more
Quick view

HEAVY COMPACTION TEST AZA0865

The AZA0865 Heavy Compaction Test Apparatus from Azalab is designed for performing the Heavy Compaction Test, commonly known as the Modified Proctor Compaction Test. This test establishes the relationship between moisture content and dry density of soils under high compaction energy, simulating field conditions achieved by modern heavy compaction equipment. The apparatus is essential for determining Maximum Dry Density (MDD) and Optimum Moisture Content (OMC) for soils used in heavy-duty pavements, airfield runways, embankments, dams, and foundations, where higher strength and durability are required.
Purpose of Test The Modified Proctor Test applies significantly greater compactive effort compared to the Standard Proctor test. The results are used by engineers to:
    • Specify target field compaction densities
    • Control moisture during earthwork
    • Ensure long-term stability and load-bearing performance
Read more
Quick view

POCKET PENTROMETER AZA0869

The AZA0869 Compact Pocket Penetrometer from Azalab is a field-ready instrument designed for rapid estimation of unconfined compressive strength (UCS) and shear strength of cohesive soils. Fully compliant with ASTM D1558 and ASTM D2573, it enables engineers, geologists, and site inspectors to quickly assess soil consistency and short-term stability without the need for laboratory equipment. Widely used in foundation evaluation, trench wall inspection, and field soil classification, the AZA0869 delivers immediate, reliable results for clays and silts during preliminary geotechnical assessments.
Applications
  • Estimation of UCS and shear strength of soft to stiff cohesive soils
  • Field classification of soil consistency
  • Pre-construction soil stability checks
  • Trench safety and shallow foundation planning
  • Geotechnical education and field research
Read more
Quick view
Rapid Moisture Meter AZA 0874 - Calcium Carbide Soil Moisture Tester

RAPID MOISTURE METER AZA0874

The AZA0874 Rapid Moisture Meter from Azalab is a compact, reliable, and field-proven instrument designed for quick determination of moisture content in soils, aggregates, sand, and other granular or fine materials. It is especially suited for on-site quality control in civil engineering, road construction, earthwork compaction, and geotechnical investigations, where timely moisture data is critical for effective decision-making.

Based on the well-established calcium carbide gas pressure method, the AZA0874 delivers accurate results within minutes, eliminating delays associated with laboratory oven-drying methods. Its portable, self-contained design makes it ideal for use at remote and demanding job sites.

Read more
Quick view
shrinkage limit set

SHRINKAGE LIMIT SET AZA0849

The AZA0849 Shrinkage Limit Set from AZALAB is a precision-engineered laboratory instrument used for determining the shrinkage limit of cohesive soils, a critical parameter within the Atterberg limits framework. This test plays a vital role in understanding the volume change characteristics of fine-grained soils when subjected to drying. The shrinkage limit represents the maximum moisture content at which further reduction in water content does not cause any appreciable decrease in soil volume. Beyond this point, air begins to enter the soil voids, and the soil mass maintains a constant volume. Accurate determination of this parameter is essential for predicting soil behavior in foundations, embankments, earth dams, and pavement structures.

Standards Compliance

The AZA0849 Shrinkage Limit Set conforms to major national and international testing standards, ensuring reliable and universally accepted test results:
  • IS 2720 (Part VII)
  • ASTM D427
  • BS 1377
  • AASHTO T 92
Read more
Quick view

STANDARD COMPACTION TEST AZA0863

The AZA0863 Standard Compaction Test Apparatus from Azalab is designed to perform the Standard Proctor Compaction Test, a fundamental geotechnical laboratory procedure used to determine the Maximum Dry Density (MDD) and Optimum Moisture Content (OMC) of soils. These parameters are essential for ensuring proper soil compaction in the construction of roads, embankments, foundations, and other earth structures. This apparatus simulates light compaction effort typically applied in the field and provides reliable, repeatable results for laboratory quality control and design verification.
Purpose & Principle The Standard Compaction Test establishes the relationship between soil moisture content and dry density under a standard compactive effort. Soil samples are compacted in layers within a cylindrical mould using a specified hammer weight and drop height. By testing at varying moisture contents and plotting a compaction curve, the MDD and OMC are obtained.
Read more
Quick view

STANDARD COMPACTION TEST AZA0864

The AZA0864 Standard Compaction Test Apparatus from Azalab is precision-engineered to perform the British Standard Proctor (Light Compaction) Test, as specified in BS 1377-4 and BS 1924-2. This apparatus is used to determine the Maximum Dry Density (MDD) and Optimum Moisture Content (OMC) of soils subjected to light compactive effort.

The test simulates field compaction achieved by light rollers and rammers and is essential for quality control of subgrades, embankments, road bases, and foundation soils. The AZA0864 is widely used in geotechnical laboratories, site investigation works, and academic institutions following British Standards.

Read more
Quick view

WATER LEVEL INDICATOR AZA0871

The AZA0871 Water Level Indicator from Azalab is a high-precision electronic instrument designed for accurate measurement of groundwater levels in boreholes, wells, standpipes, and observation tubes. It is an essential tool for professionals involved in groundwater monitoring, environmental site assessments, hydrological investigations, geotechnical projects, and dewatering operations.

Accurate water level measurement is fundamental for understanding aquifer behavior, monitoring seasonal or pumping-induced fluctuations, assessing contamination plumes, and supporting the design of foundations, irrigation systems, and water resource management plans. The AZA0871 provides a reliable, fast, and field-ready solution for both static and dynamic water level measurements.

Read more
Quick view