Rock
Aggregate
Cement
Concrete
Soil
Steel
Bitumen/Asphalt
Security Survey Equipment
General Items
AUTOMATED CLEVELAND OPEN CUP FLASH & FIRE POINT ANALYZER AZA1276
The AutoFlash1276 (Model: AZA1276) from AZA Lab is a fully automated, microcontroller-based Cleveland Open Cup (COC) Flash and Fire Point Analyzer designed for high-temperature petroleum testing applications. Engineered for accuracy, safety, and regulatory compliance, the AZA1276 delivers reliable flash and fire point determination for materials with flash points above 79 °C up to 400 °C.
Complying with ASTM D92, ISO 2592, IS 1448 (Part 69), and IP 36, this advanced analyzer is ideal for laboratories and industrial environments where repeatability, operator safety, and international acceptance are critical.
Description
Precision Flash & Fire Point Determination
Unlike flash-only instruments, the AZA1276 precisely determines both:
-
Flash Point – the lowest temperature at which vapors ignite momentarily
-
Fire Point – the temperature at which combustion is sustained for ≥ 5 seconds
This dual-capability makes the AutoFlash-1276 an essential tool for hazard classification, safety compliance, and product characterization of viscous petroleum materials.
Fully Automated & Standalone Operation
The AZA1276 is a standalone analyzer with an embedded control system, eliminating the need for external computers. Its intuitive LCD / touchscreen interface allows operators to:
-
Select standardized test methods
-
Enter expected flash point values
-
Start automated test cycles with minimal intervention
The system automatically controls heating rate, ignition timing, flame detection, and fire sustain logic, ensuring consistent and reproducible results while reducing operator dependency.
Designed for Viscous Petroleum Products
The Cleveland Open Cup method is particularly suited for high-flash, viscous substances, and the AZA1276 performs exceptionally well with:
-
Lubricating oils and base oils
-
Transformer and insulating oils
-
Bitumen and asphalt materials
-
Greases and waxes
-
Biodiesel and bio-based oils
(Note: Not intended for fuel oils.)
Advanced Safety & Control Features
Safety is integral to the design of the AZA1276. The analyzer includes:
-
Automatic ignition control (electric or gas, interchangeable)
-
Photoelectric flame detection sensor
-
Auto flame suppression and shutdown logic
-
Over-temperature protection and flame shield enclosure
-
Automatic barometric pressure compensation for accurate results
These features make the system suitable for unattended or extended testing cycles in busy laboratory environments.
Applications
-
Flash & fire point testing of viscous petroleum products
-
Quality control in refineries and petrochemical plants
-
Bitumen and asphalt testing laboratories
-
Biodiesel and lubricant compliance testing
-
Hazardous material classification (UN / DOT / GHS)
-
Research & development and academic laboratories
Technical Specifications
| Feature | Specification |
|---|---|
| Model | AZA1276 |
| Method | Cleveland Open Cup (COC), Fully Automated |
| Temperature Range | 79 °C to 400 °C |
| Flash Point Detection | Automatic |
| Fire Point Logic | Sustained flame ≥ 5 seconds |
| Standards Compliance | ASTM D92, ISO 2592, IS 1448 (P:69), IP 36 |
| Sample Types | Lubricants, greases, waxes, bitumen, biodiesel |
| Ignition Type | Electric / Gas (auto-controlled) |
| Flame Detection | Photoelectric sensor |
| User Interface | LCD / Touchscreen with programmable parameters |
| Safety Features | Overheat protection, flame shield, auto shutoff |
| Data Output | USB / RS-232 / Built-in printer |
| Power Supply | 230 V AC, 50 Hz |
| Certifications | CE Certified, ISO Compliant |
What’s Included
-
1 × AutoFlash-1276 Analyzer Unit
-
1 × Standard Cleveland Open Cup test cup with cover
-
1 × Electric / Gas ignition module
-
1 × Built-in thermal printer with paper roll
-
1 × Calibration & pressure test certificate
Optional Accessories:
Flame suppression hood, external cooling module
Frequently Asked Questions (FAQ)
Q1: What temperature range does AZA1276 cover?
It accurately measures flash and fire points from 79 °C to 400 °C.
Q2: Does it automatically detect the fire point?
Yes. The system identifies the fire point when combustion sustains for 5 seconds or more.
Q3: Which materials are best suited for this analyzer?
Lubricants, transformer oils, waxes, greases, bitumen, and biodiesel (excluding fuel oils).
Q4: Is the analyzer internationally compliant?
Yes. It complies with ASTM, ISO, IS, and IP standards.
Q5: Can it operate safely with minimal supervision?
Absolutely. Built-in flame detection, suppression, interlocks, and auto shutdown ensure safe operation.
Model: AZA1276 – AutoFlash-1276 Cleveland Open Cup Flash & Fire Point Analyzer
| Function | Details |
|---|---|
| Heating | Coil heater 1000W @ 230 VACHeating rate: 1–20°C/min (user-defined or method-based) |
| Cooling | Centrifugal blower, 56.5 CFM, 35W @ 230 VAC |
| Ignition | Stepper motor-controlled movement7-step Electric Igniter brightness adjustment |
| Arm Movement | Stepper-controlled swing arm with fixed components: sample cup, flash/fire sensors, igniter |
| Flame Extinguisher | Automatic flame suppression after flash/fire point detection |
| Parameter | Specification |
|---|---|
| Auto Calibration | Auto temperature calibration before every test—no external device required |
| Sample Temperature | PT100 Class A, SS Sheath; 0°C to 400°C |
| Bath Temperature | PT100 Class A, Disk Type; 0°C to 500°C |
| Flash Detection | Ionisation ring |
| Fire Detection | Thermal sensor |
| Ambient Pressure | Built-in sensor; 700–1100 hPa (500–800 mmHg) |
Related products
ADVANCED TRIAXIAL TEST SYSTEM (UU–CU–CD CAPABLE) AZA1296
The AZA LAB Advanced Triaxial Test System AZA1296 is a fully automated geotechnical laboratory testing system designed for accurate determination of soil shear strength and deformation characteristics under controlled stress and drainage conditions.
The system supports all major triaxial compression testing modes including:
- Unconsolidated Undrained (UU)
- Consolidated Undrained (CU)
- Consolidated Drained (CD)
Engineered for high-precision geotechnical analysis, the AZA1296 replicates in-situ soil stress conditions to evaluate soil stability, strength behavior, pore pressure response, and failure mechanisms under axial loading.
The system integrates servo-controlled loading, automatic pressure regulation, real-time pore pressure monitoring, automated data acquisition, and advanced software analysis, making it ideal for geotechnical laboratories, civil engineering projects, infrastructure development, research institutions, and academic applications.
AUOTFLASH AUTOMATED ABEL FLASH POINT ANALYZER AZA1277
The AutoFlash-1277 (Model: AZA1277) from AZA Lab is a fully automated, microcontroller-based Abel Flash Point Analyzer designed for accurate, safe, and repeatable determination of flash points of combustible liquids. Engineered to meet stringent international testing requirements, this advanced instrument conforms to IP 170, ISO 13736, and IS 1448 (Part 20) standards.
Covering a standard temperature range of –30°C to 70°C, extendable up to 110°C, the AZA1277 is ideally suited for laboratories involved in petroleum testing, petrochemical quality control, fuels research, and regulatory compliance.
CLEVELAND OPEN CUP (D92) FLASH & FIRE POINT TESTER AZA1291
The Cleveland Open Cup Flash Point Tester AZA1291 from AZA Lab is a precision-engineered analytical instrument designed for accurate determination of flash point and fire point of petroleum products in full compliance with ASTM D92 and GB/T 3536-2008 standards. Built for reliability, safety, and intelligent operation, the AZA1291 is ideal for petroleum laboratories, refineries, inspection agencies, and quality control departments requiring repeatable and standards-compliant results.
The analyzer is suitable for samples with flash points ranging from 79°C to 400°C, covering a broad spectrum of petroleum products such as lubricating oils, transformer oils, diesel, heating oils, base oils, waxes, and other high-flash-point materials.
PETROLEUM PRODUCT DISTILLATION TESTER AZA1284
The AZA1284 Manual Distillation Unit from AZA Lab is a high-precision, front-type petroleum distillation system engineered for accurate determination of distillation characteristics of petroleum products in accordance with ASTM D86 and GB/T 6536 test methods. Designed for laboratories that require reliable manual control with superior thermal stability, this unit delivers consistent, repeatable, and standards-compliant results.
With its dual-unit configuration, independently controlled constant-temperature baths, and continuously adjustable heating power, the AZA1284 offers exceptional flexibility and efficiency for routine quality control, inspection, and research applications.
SEMI-AUTOMATED ABEL FLASH POINT ANALYZER AZA1275
The AZA1275 AutoFlash Abel Flash Point Tester from AZA Lab is a semi-automated, microcontroller-based Abel closed cup analyzer designed for precise determination of flash points of low-flash combustible liquids. Engineered to comply with IP 170, ISO 13736, and IS 1448 (Part 20), AZA1275 ensures reliable, repeatable, and regulation-compliant testing for petroleum, chemical, and industrial laboratories.
Equipped with an integrated Windows-based PC interface, AZA1275 delivers intuitive operation, automated flash detection, controlled heating, and comprehensive fault diagnostics. The system is ideal for laboratories that require accuracy, safety, and efficiency without the cost complexity of fully automated systems.
STAINLESS STEEL COC CLEVELAND OPEN CUP FLASH POINT ANALYZER AZA1293
The AZA1293 Flash Point Analyzer from AZA Lab is a precision-engineered instrument designed for accurate determination of the flash point of flammable and combustible liquids using the Cleveland Open Cup (COC) method. Manufactured with high-grade stainless steel construction, this analyzer ensures excellent thermal stability, long service life, and consistent test performance even under demanding laboratory conditions.
Fully compliant with ASTM D92, the AZA1293 is an essential laboratory tool for petrochemical laboratories, refineries, lubricant manufacturers, fuel testing facilities, and industrial R&D centers where reliable flash point determination is critical for safety classification and quality assurance.
X-RAY SULFUR METER TESTER AZA1300B
The X-Ray Sulfur Meter (Model: AZA1300B) from AZA Lab is a highly efficient and precise instrument designed to measure sulfur content in petroleum and petrochemical products during production. It enables fast, non-destructive analysis, making it an essential tool for quality control, process optimization, and regulatory compliance.
Ideal for use in refineries, laboratories, and production sites, this instrument provides accurate, reliable results with minimal sample preparation, ensuring consistent performance and repeatability.
XRF SULFUR CONTENT TESTER AZA1300
The AZA Lab Sulfur Content Analyzer – AZA1300 is a state-of-the-art instrument designed for precise and rapid determination of sulfur content in petroleum, petrochemical, and coal chemical products. Based on the energy-dispersive X-ray fluorescence (EDXRF) principle, it integrates advanced electrical, mechanical, and microprocessor technologies to deliver high accuracy, reliability, and ease of operation.
Engineered to comply with ASTM D4294, GB/T 17040, SH/T0742, and GB/T11140 standards, the Model 1300 provides dependable measurement results with excellent repeatability and reproducibility. Its intelligent design ensures automatic corrections for environmental conditions such as temperature, pressure, and C/H ratio, making it a versatile solution for laboratories and production facilities alike.
Compact, user-friendly, and equipped with advanced safety features, the AZA1300 is an ideal tool for routine quality control, process monitoring, and research applications where sulfur determination is critical.