Dynamic Cone Penetrometer AZA 0872 - In-Situ Soil Strength Test
Click to enlarge
WATER LEVEL INDICATOR AZA0871
WATER LEVEL INDICATOR AZA0871
Back to products
SPEEDY MOISTURE ZI 3027 METER (D2 LARGE) AZA0873
SPEEDY MOISTURE ZI 3027 METER (D2 LARGE) AZA0873

DYNAMIC CONE PENETROMETER AZA0872

The AZA0872 Dynamic Cone Penetrometer (DCP) from Azalab is a robust, field-proven instrument designed for rapid in-situ evaluation of soil strength, stiffness, and compaction. It is extensively used by civil engineers, geotechnical consultants, and construction teams for pavement design, quality control, and site investigation works.

The DCP test provides a fast and economical method to assess the strength of subgrades, sub-bases, and granular base course layers, with results that can be directly correlated to California Bearing Ratio (CBR) values. This eliminates the need for time-consuming laboratory testing or undisturbed soil sampling, enabling immediate decision-making at site.

View Specification PDF
Enquiry on WhatsApp
Category:
Description

Description

Principle of Operation

The AZA0872 operates on a simple and well-established impact penetration principle. A hardened steel cone attached to a drive rod is driven into the ground by repeatedly dropping a standard weight hammer from a fixed height. The penetration per blow is measured and recorded, providing a direct indication of soil resistance.

By plotting penetration versus depth, a continuous strength profile of the pavement or soil layer is obtained, clearly identifying weak zones, variability, or insufficient compaction.

Key Features

  • Rapid in-situ evaluation of soil and pavement layers

  • Direct correlation of penetration data to CBR values

  • No power supply or boreholes required

  • Portable and suitable for single-operator field use

  • Immediate results for on-site quality control

  • Heavy-duty steel construction for long service life

Applications

  • Pavement evaluation (subgrade, sub-base, base course)

  • Compaction quality control during road construction

  • Shallow foundation investigations

  • Identification of weak or soft soil zones

  • General geotechnical site reconnaissance

Technical Specifications

Model Number: AZA0872
Apparatus Type: Dynamic Cone Penetrometer (DCP)
Purpose: In-situ soil strength, stiffness, and compaction evaluation

Hammer

  • Weight: Typically 8 kg (17.6 lbs)

  • Drop Height: 575 mm (22.6 in), standardized free fall

Cone Tip

  • Material: Hardened steel

  • Cone Angle: 60° (standard)

  • Base Diameter: 20 mm (standard)

Drive Rod

  • Material: High-strength steel

  • Design: Sectional / quick-connect rods

Measuring Scale

  • Graduated rod, 1000 mm or 1500 mm length

  • Clear millimeter divisions

Anvil

  • Hardened steel impact anvil

Maximum Penetration Depth

  • Typically up to 2–3 meters (depending on soil conditions and rod length)

Components Supplied

  • Hammer

  • Anvil

  • Guide rod assembly

  • Drive rods

  • Hardened cone tip

  • Measuring scale

  • Rod puller (optional, recommended)

  • Carrying case

Compliance

  • Designed in accordance with ASTM D6951

  • AASHTO T 252 (principles)

Construction

  • Heavy-duty steel components

  • Designed for repetitive impact and harsh field use

Advantages

  • Fast, economical alternative to laboratory CBR testing

  • Continuous strength profiling with depth

  • Ideal for construction quality assurance

  • Minimal training required

  • Highly portable and field-ready

Frequently Asked Questions (FAQ)

Q1: What is the AZA0872 used for?
It is used for rapid in-situ testing of soil strength and compaction, especially in pavement layers such as subgrade, sub-base, and base course.

Q2: How does the DCP test indicate soil strength?
By measuring the penetration depth of a cone per hammer blow, which reflects soil resistance and density.

Q3: Can AZA0872 results be correlated to CBR values?
Yes. One of the main benefits of the DCP test is its established correlation with CBR values used in pavement design.

Q4: What soil types can be tested?
The AZA0872 is suitable for most granular and cohesive soils commonly encountered in road and pavement construction.

Q5: Is external power required?
No. The instrument is fully mechanical and ideal for remote field locations.

Q6: What standards does AZA0872 follow?
It is designed to meet the principles of ASTM D6951 and AASHTO T 252.

Q7: What is the typical depth of testing?
Depending on soil conditions and rod configuration, effective penetration is usually up to 2–3 meters.

Additional information

Additional information

Model Number

AZA 0872
Apparatus Type

Dynamic Cone Penetrometer (DCP)
Anvil

Hardened steel.
Portability

Designed for high portability and ease of field use.
Construction

Robust, heavy-duty steel components for durability.

Related products

HEAVY COMPACTION TEST AZA0865

The AZA0865 Heavy Compaction Test Apparatus from Azalab is designed for performing the Heavy Compaction Test, commonly known as the Modified Proctor Compaction Test. This test establishes the relationship between moisture content and dry density of soils under high compaction energy, simulating field conditions achieved by modern heavy compaction equipment. The apparatus is essential for determining Maximum Dry Density (MDD) and Optimum Moisture Content (OMC) for soils used in heavy-duty pavements, airfield runways, embankments, dams, and foundations, where higher strength and durability are required.
Purpose of Test The Modified Proctor Test applies significantly greater compactive effort compared to the Standard Proctor test. The results are used by engineers to:
    • Specify target field compaction densities
    • Control moisture during earthwork
    • Ensure long-term stability and load-bearing performance
Read more
Quick view

LINEAR SHRINKAGE MOULD AZA0850

The AZA0850 Precision Linear Shrinkage Mould from AZALAB is a compact and highly accurate laboratory instrument designed for determining the linear shrinkage of fine-grained cohesive soils in accordance with BS 1377-2. This test is a key component of soil classification and is especially important in identifying shrink–swell behavior of clays and expansive soils.

Linear shrinkage testing measures the reduction in length of a soil specimen upon drying, expressed as a percentage of its original length. The results provide valuable insight into soil expansiveness, volume stability, and suitability for foundations, pavements, and earthworks.

Manufactured from high-quality brass or stainless steel, the AZA0850 mould offers precise internal dimensions, excellent corrosion resistance, and a smooth polished finish for easy sample preparation and removal. Its robust construction ensures repeatable, reliable results even under high-frequency laboratory use.

Read more
Quick view

MOTORISED SAND EQUIVALENT SHAKER AZA0861

The AZA0861 Motorised Sand Equivalent Shaker is a precision-engineered laboratory instrument designed to automate the agitation phase of the Sand Equivalent Test. It ensures uniform, repeatable shaking in full compliance with ASTM D2419, AASHTO T176, and IS 2720 (Part 37), eliminating operator variability associated with manual shaking. This shaker is an essential accessory for soil, aggregate, and construction material testing laboratories where accurate assessment of sand cleanliness and clay-like fines is critical.
Purpose & Function The Sand Equivalent Test evaluates the relative proportion of sand versus clay-sized or plastic fines in fine aggregates. During testing, the sample and calcium chloride solution must be agitated for a defined stroke length and rate. The AZA0861 automates this process using a controlled reciprocating motion, delivering consistent agitation that improves repeatability, reduces operator fatigue, and enhances overall test reliability.
Read more
Quick view

PLASTIC LIMIT SET AZA0848

The AZA0848 Plastic Limit Set is a standardized soil testing kit designed for the accurate determination of the plastic limit of fine-grained soils, in accordance with IS: 2720 (Part 5) and ASTM D4318. The plastic limit is a fundamental soil index property used in soil classification and in evaluating soil behavior under varying moisture conditions. This test kit is an essential component of geotechnical investigations, civil engineering projects, and soil mechanics laboratories, providing reliable and repeatable results in both laboratory and field environments. Purpose & Importance The plastic limit represents the lowest moisture content at which soil remains plastic and can be rolled into threads of 3 mm diameter without crumbling. Determination of this limit is critical for:
  • Soil classification (Atterberg limits)
  • Assessing workability and consistency
  • Evaluating shrink–swell characteristics
  • Supporting foundation, pavement, and earthwork design
The AZA0848 set provides all required accessories to conduct the test accurately, efficiently, and in full compliance with applicable standards.
Read more
Quick view

PLUMMET BALANCE AZA0862

The AZA0862 Plummet Balance is a specialized laboratory apparatus designed for determining the specific gravity of fine-grained soils, particularly clays and silts that are difficult to test using conventional pycnometer methods. It is widely used in geotechnical engineering, soil mechanics laboratories, and construction quality control applications. Manufactured by Azalab, the instrument complies with ASTM D854 and IS 2720 (Part 3 / Sec 1) standards and provides rapid, repeatable, and reliable results for dispersed soil samples commonly used in sedimentation, pipette, and hydrometer analyses.
Working Principle The plummet balance method determines the specific gravity of soil solids by measuring the apparent weight of a suspended plummet immersed in a soil–water suspension. The balance pointer directly indicates the percentage of soil in suspension via a calibrated scale, eliminating lengthy calculations. A rack-and-pinion height adjustment allows the plummet to be positioned at the required depth. The percentage of soil in suspension is read directly from the graduated scale, making this method faster and more user-friendly than traditional sedimentation calculations. The set is supplied with a temperature correction chart relating the constant K to suspension temperature for soils with specific gravity ranging from 2.4 to 2.8, facilitating accurate application of Stokes’ law.
Read more
Quick view
Rapid Moisture Meter AZA 0874 - Calcium Carbide Soil Moisture Tester

RAPID MOISTURE METER AZA0874

The AZA0874 Rapid Moisture Meter from Azalab is a compact, reliable, and field-proven instrument designed for quick determination of moisture content in soils, aggregates, sand, and other granular or fine materials. It is especially suited for on-site quality control in civil engineering, road construction, earthwork compaction, and geotechnical investigations, where timely moisture data is critical for effective decision-making.

Based on the well-established calcium carbide gas pressure method, the AZA0874 delivers accurate results within minutes, eliminating delays associated with laboratory oven-drying methods. Its portable, self-contained design makes it ideal for use at remote and demanding job sites.

Read more
Quick view

VICKSBERG PENTROMETER (PROVING RING TYPE) AZA0870

The Vicksberg Penetrometer (Proving Ring Type) – AZA0870 by Azalab is a precision-engineered field instrument designed to determine the bearing capacity of subgrades, assess soil compaction levels, and conduct rapid shallow soil investigations. It is widely used in road construction, foundation assessment, and infrastructure site inspections where quick, reliable field results are required.

Designed for efficient single-person operation, the instrument incorporates a 100 kg (1 kN) proving ring combined with a high-sensitivity dial gauge of 0.002 mm least count, ensuring accurate and repeatable load measurements. An optical viewer is provided for clear dial visibility, even under bright outdoor conditions, making the unit ideal for on-site testing.

Whether for routine site investigations or quality control of compacted layers, the AZA0870 delivers fast, dependable, and field-ready performance.

Read more
Quick view

WATER LEVEL INDICATOR AZA0871

The AZA0871 Water Level Indicator from Azalab is a high-precision electronic instrument designed for accurate measurement of groundwater levels in boreholes, wells, standpipes, and observation tubes. It is an essential tool for professionals involved in groundwater monitoring, environmental site assessments, hydrological investigations, geotechnical projects, and dewatering operations.

Accurate water level measurement is fundamental for understanding aquifer behavior, monitoring seasonal or pumping-induced fluctuations, assessing contamination plumes, and supporting the design of foundations, irrigation systems, and water resource management plans. The AZA0871 provides a reliable, fast, and field-ready solution for both static and dynamic water level measurements.

Read more
Quick view