AZA 0931 Integral Proving Rings | Azalab Calibration
Click to enlarge
LIGHT WEIGHT DEFLECTOMETER AZA0930
LIGHT WEIGHT DEFLECTOMETER AZA0930
Back to products
CORE CUTTING/CORE DRILLING MACHINE (PETROL) AZA0994
CORE CUTTING/CORE DRILLING MACHINE (PETROL) AZA0994

INTEGRAL PROVING RINGS AZA0931

The Azalab AZA0931 Integral Proving Ring is a high-precision force calibration instrument designed for the verification and calibration of force-measuring systems used in material testing machines. It is widely employed for calibrating Universal Testing Machines (UTMs), Compression Testing Machines (CTMs), spring testing machines, and other load-applying equipment across civil engineering, metallurgy, and material science laboratories.

In applications where measurement accuracy directly impacts safety, compliance, and product quality, the AZA0931 provides a robust, reliable, and NABL-traceable solution, ensuring force measurements remain accurate and standards-compliant.

View Specification PDF
Enquiry on WhatsApp
Category:
Description

Description

Principle of Operation

The AZA0931 operates on the principle of elastic deformation:

  1. A precisely machined alloy steel ring is subjected to a known compressive or tensile load.

  2. The applied force causes a small, proportional elastic deflection of the ring.

  3. This deflection is measured using an integrally mounted dial gauge or electronic transducer.

  4. A unique calibration factor or calibration curve, supplied with each ring, directly correlates deflection to applied force (kN or kgf).

The “Integral” design ensures that the measuring device is permanently mounted within the ring body, providing compactness, robustness, and repeatable accuracy.

Key Features

  • Manufactured from high-strength, heat-treated alloy steel

  • Precisely machined for uniform stress distribution

  • High elastic stability with negligible permanent deformation

  • Integral high-sensitivity dial gauge (standard)

  • Optional electronic transducer with digital readout

  • Wide force capacity range for low to ultra-high loads

  • Individually NABL-calibrated with traceability to national and international standards

  • Rugged construction for laboratory and industrial use

  • Supplied with protective wooden or plastic carrying case

  • Compatible with most UTMs, CTMs, and force calibration setups

Applications

  • Calibration of Universal Testing Machines (UTMs)

  • Calibration of Compression Testing Machines (CTMs)

  • Verification of spring testing machines

  • Load cell verification and validation

  • Quality control in civil, mechanical, and metallurgical laboratories

  • Essential equipment for NABL-accredited laboratories

  • Infrastructure, automotive, steel, cement, and academic research testing

Standards Compliance

The AZA0931 conforms to the following international and Indian standards:

  • IS 4169:1982 (Reaffirmed 2021) – Proving Rings for Testing Machines

  • ASTM E74 – Calibration of Force-Measuring Instruments

  • ISO 376:2011 – Calibration of force-proving instruments for testing machines

Technical Specifications

Parameter Description
Model AZA0931
Product Type Integral Proving Ring
Measurement Principle Elastic deformation under load
Measurement Mode Compression and/or Tension (as per design)
Material High-grade alloy steel, heat-treated
Capacity Range 5 kN to 3000 kN (or higher on request)
Deflection Indicator (Standard) Precision dial gauge (0.002 mm or 0.001 mm LC)
Deflection Indicator (Optional) Electronic transducer with digital display
Accuracy Class Class 1 or Class 0.5 (as per ISO 376)
Calibration Individually calibrated
Traceability NABL-traceable
Construction Compact, rigid, and stable
Accessories Carrying case, NABL calibration certificate
Standards IS 4169, ASTM E74, ISO 376
Country of Origin Made in India

Standard Supply

  • AZA0931 Integral Proving Ring

  • Integral dial gauge or digital transducer (as specified)

  • NABL-traceable calibration certificate

  • Protective wooden or plastic carrying case

  • User documentation

Frequently Asked Questions (FAQ)

Q1. What is the primary use of AZA0931?
Calibration and verification of force-measuring systems in UTMs, CTMs, and similar testing machines.

Q2. How does it measure force?
By measuring the elastic deflection of a precision alloy steel ring under load.

Q3. Is calibration certification included?
Yes, each unit is supplied with an NABL-traceable calibration certificate.

Q4. What force capacities are available?
Standard capacities range from 5 kN to 3000 kN, with higher capacities available on request.

Q5. Why is it called an “Integral” proving ring?
Because the deflection-measuring device is permanently built into the ring body.

Product Summary

  • Model: AZA0931

  • High-precision integral proving ring for force calibration

  • Suitable for UTMs, CTMs, and load-measuring systems

  • High-grade alloy steel construction

  • Dial gauge or optional digital transducer

  • Wide capacity range

  • NABL-traceable calibration

  • Complies with IS, ASTM, and ISO standards

AZA0931 – The benchmark instrument for reliable force calibration.

Additional information

Additional information

Model

AZA 0931
Product Type

Integral Proving Ring (Force Calibration Device)
Principle

Elastic Deformation under Load
Standards Compliance

IS 4169, ASTM E74, ISO 376.
Country of Origin

Made in India
Body Type

Compact, robust, and stable.

Related products

GRAIN SIZE ANALYSIS (PIPETTE METHOD) AZA0856

The AZA0856 Grain Size Analysis (Pipette Method) Apparatus from AZA Lab is a precision testing setup used for determining the distribution of fine soil particles such as silt and clay. It is widely used in geotechnical engineering, civil construction quality control, soil mechanics research, and academic laboratories, particularly where conventional sieve analysis is ineffective for particles finer than 75 microns. This apparatus is designed for the mechanical analysis of sub-sieve soil particles, expressing quantitatively the proportion by weight of various particle sizes present in a soil sample. The pipette method, based on sedimentation principles and Stokes’ Law, provides accurate and repeatable results for fine-grained soils. The system consists of a sliding vertical panel operated by a precision screw mechanism, allowing an Anderson pipette to be raised or lowered accurately. A sedimentation tube is held securely below the pipette using a laboratory clamp. The depth of immersion is measured using a millimeter-graduated scale mounted alongside the sliding panel. The apparatus is supplied complete with a 10 ml Anderson pipette, a 500 ml glass sedimentation tube, and test form pads, conforming to standard laboratory practices.
Read more
Quick view

HEAVY COMPACTION TEST AZA0865

The AZA0865 Heavy Compaction Test Apparatus from Azalab is designed for performing the Heavy Compaction Test, commonly known as the Modified Proctor Compaction Test. This test establishes the relationship between moisture content and dry density of soils under high compaction energy, simulating field conditions achieved by modern heavy compaction equipment. The apparatus is essential for determining Maximum Dry Density (MDD) and Optimum Moisture Content (OMC) for soils used in heavy-duty pavements, airfield runways, embankments, dams, and foundations, where higher strength and durability are required.
Purpose of Test The Modified Proctor Test applies significantly greater compactive effort compared to the Standard Proctor test. The results are used by engineers to:
    • Specify target field compaction densities
    • Control moisture during earthwork
    • Ensure long-term stability and load-bearing performance
Read more
Quick view

PARTICLE SIZE SEDIMENTATION (HYDROMETER METHOD) AZA0857

AZA0857 – Particle Size Sedimentation Apparatus (Hydrometer Method) The AZA0857 Particle Size Sedimentation Apparatus (Hydrometer Method) from AZA Lab is designed for determining the particle size distribution of fine-grained soils, particularly silts and clays smaller than 75 microns. This method is widely adopted in soil mechanics, geotechnical engineering, civil construction quality control, and academic laboratories where accurate characterization of cohesive soils is essential. The hydrometer method is based on the sedimentation principle governed by Stokes’ Law, measuring changes in the density of a soil–water suspension over time. By recording hydrometer readings at defined intervals, the percentage of soil particles remaining in suspension is calculated, enabling precise determination of grain size distribution for fine soils beyond the practical limits of sieve analysis.
Read more
Quick view

PLUMMET BALANCE AZA0862

The AZA0862 Plummet Balance is a specialized laboratory apparatus designed for determining the specific gravity of fine-grained soils, particularly clays and silts that are difficult to test using conventional pycnometer methods. It is widely used in geotechnical engineering, soil mechanics laboratories, and construction quality control applications. Manufactured by Azalab, the instrument complies with ASTM D854 and IS 2720 (Part 3 / Sec 1) standards and provides rapid, repeatable, and reliable results for dispersed soil samples commonly used in sedimentation, pipette, and hydrometer analyses.
Working Principle The plummet balance method determines the specific gravity of soil solids by measuring the apparent weight of a suspended plummet immersed in a soil–water suspension. The balance pointer directly indicates the percentage of soil in suspension via a calibrated scale, eliminating lengthy calculations. A rack-and-pinion height adjustment allows the plummet to be positioned at the required depth. The percentage of soil in suspension is read directly from the graduated scale, making this method faster and more user-friendly than traditional sedimentation calculations. The set is supplied with a temperature correction chart relating the constant K to suspension temperature for soils with specific gravity ranging from 2.4 to 2.8, facilitating accurate application of Stokes’ law.
Read more
Quick view

POCKET PENTROMETER AZA0869

The AZA0869 Compact Pocket Penetrometer from Azalab is a field-ready instrument designed for rapid estimation of unconfined compressive strength (UCS) and shear strength of cohesive soils. Fully compliant with ASTM D1558 and ASTM D2573, it enables engineers, geologists, and site inspectors to quickly assess soil consistency and short-term stability without the need for laboratory equipment. Widely used in foundation evaluation, trench wall inspection, and field soil classification, the AZA0869 delivers immediate, reliable results for clays and silts during preliminary geotechnical assessments.
Applications
  • Estimation of UCS and shear strength of soft to stiff cohesive soils
  • Field classification of soil consistency
  • Pre-construction soil stability checks
  • Trench safety and shallow foundation planning
  • Geotechnical education and field research
Read more
Quick view

PROCTOR NEEDLES (SPRING TYPE) AZA0868

The AZA0868 Precision Proctor Needles (Spring Type) from Azalab are designed for rapid, on-site estimation of soil compaction and moisture condition. This portable instrument provides a practical alternative to full laboratory Proctor testing for preliminary assessment and quality control, particularly on cohesive and semi-cohesive soils encountered in embankments, subgrades, and trench backfills. The instrument employs a calibrated, spring-loaded plunger to measure penetration resistance directly (0–40 kg range). Two graduated stems allow accurate tracking of penetration depth, while a comprehensive set of interchangeable needle tips enables testing across a range of soil densities and particle characteristics.
Applications
  • Field assessment of soil compaction
  • Estimation of optimum moisture condition
  • Subgrade, fill, and trench inspection
  • Construction quality control checks
  • Geotechnical and educational field investigations
Read more
Quick view
shrinkage limit set

SHRINKAGE LIMIT SET AZA0849

The AZA0849 Shrinkage Limit Set from AZALAB is a precision-engineered laboratory instrument used for determining the shrinkage limit of cohesive soils, a critical parameter within the Atterberg limits framework. This test plays a vital role in understanding the volume change characteristics of fine-grained soils when subjected to drying. The shrinkage limit represents the maximum moisture content at which further reduction in water content does not cause any appreciable decrease in soil volume. Beyond this point, air begins to enter the soil voids, and the soil mass maintains a constant volume. Accurate determination of this parameter is essential for predicting soil behavior in foundations, embankments, earth dams, and pavement structures.

Standards Compliance

The AZA0849 Shrinkage Limit Set conforms to major national and international testing standards, ensuring reliable and universally accepted test results:
  • IS 2720 (Part VII)
  • ASTM D427
  • BS 1377
  • AASHTO T 92
Read more
Quick view

VICKSBERG PENTROMETER (PROVING RING TYPE) AZA0870

The Vicksberg Penetrometer (Proving Ring Type) – AZA0870 by Azalab is a precision-engineered field instrument designed to determine the bearing capacity of subgrades, assess soil compaction levels, and conduct rapid shallow soil investigations. It is widely used in road construction, foundation assessment, and infrastructure site inspections where quick, reliable field results are required.

Designed for efficient single-person operation, the instrument incorporates a 100 kg (1 kN) proving ring combined with a high-sensitivity dial gauge of 0.002 mm least count, ensuring accurate and repeatable load measurements. An optical viewer is provided for clear dial visibility, even under bright outdoor conditions, making the unit ideal for on-site testing.

Whether for routine site investigations or quality control of compacted layers, the AZA0870 delivers fast, dependable, and field-ready performance.

Read more
Quick view