Rock
Aggregate
Cement
Concrete
Soil
Steel
Bitumen/Asphalt
Security Survey Equipment
General Items
RIFFLE SAMPLE DIVIDER AZA0980
The AZA0980 Riffle Sample Divider is a precision laboratory instrument designed for accurate and unbiased splitting of bulk material samples into representative portions. It is widely used in geotechnical, construction, mining, and agricultural laboratories to ensure that test samples remain statistically reliable and repeatable.
Manufactured for durability and precision, this unit is ideal for reducing large quantities of soil, sand, aggregates, cement, and powdered materials to manageable, test-ready sizes.
Key Features
- Accurate material splitting for laboratory testing
- Heavy-duty corrosion-resistant metal construction
- Uniform slot widths for consistent sample division
- Smooth-flow chute design for minimal sample loss
- Supplied with two receiving pans for clean, efficient operation
- Compact bench-top design
Description
Construction & Design
The AZA0980 consists of a controlled-feed hopper mounted above precision-machined alternating chutes (riffles). These chutes direct material evenly into two separate collecting pans, creating two equal and representative sub-samples. Repeating the process ensures high statistical accuracy without operator bias.
The body is fabricated from powder-coated or galvanized steel to resist corrosion and wear, making it suitable for long-term laboratory and site use.
Applications
-
Soil and aggregate sample preparation
-
Sieve analysis and compaction testing
-
Cement and powdered chemical sample division
-
Mining and mineral assay preparation
-
Grain and agricultural quality testing
Available Models
-
Slot widths: 6 mm, 13 mm, 25 mm, 38 mm
-
Chute count: 12–20 chutes (depending on model)
Technical Specifications
| Parameter | Specification |
|---|---|
| Model No. | AZA0980 |
| Material | Powder-coated / Galvanized steel |
| Slot Width Options | 6 mm, 13 mm, 25 mm, 38 mm |
| Number of Chutes | 12 to 20 |
| Accessories Included | Hopper + 2 Receiving pans |
| Sample Types | Soil, sand, gravel, powders |
| Standards | ASTM C702, IS: 1607 |
FAQ
Q1: What is the main use of AZA0980?
It is used to divide bulk samples into equal, representative test portions.
Q2: What materials can be tested?
Soil, aggregates, sand, cement, mining samples, grains, and powders.
Q3: Are different chute sizes available?
Yes, multiple slot widths are available to suit different material sizes.
Q4: How do I maintain the unit?
Clean the chutes after each use and store in a dry environment.
Q5: Does it meet standards?
Yes, it complies with ASTM C702 and IS:1607 testing standards.
Additional information
| Construction Material |
Powder-coated / Galvanized steel |
|---|---|
| Slot Width Options |
6 mm, 13 mm, 25 mm, 38 mm |
| Number of Chutes |
12 to 20, based on model |
| Included Accessories |
2 Receiving pans, 1 Hopper |
You may also like…
ADVANCED TRIAXIAL TEST SYSTEM (UU–CU–CD CAPABLE) AZA1296
The AZA LAB Advanced Triaxial Test System AZA1296 is a fully automated geotechnical laboratory testing system designed for accurate determination of soil shear strength and deformation characteristics under controlled stress and drainage conditions.
The system supports all major triaxial compression testing modes including:
- Unconsolidated Undrained (UU)
- Consolidated Undrained (CU)
- Consolidated Drained (CD)
Engineered for high-precision geotechnical analysis, the AZA1296 replicates in-situ soil stress conditions to evaluate soil stability, strength behavior, pore pressure response, and failure mechanisms under axial loading.
The system integrates servo-controlled loading, automatic pressure regulation, real-time pore pressure monitoring, automated data acquisition, and advanced software analysis, making it ideal for geotechnical laboratories, civil engineering projects, infrastructure development, research institutions, and academic applications.
AIR BAG TRAINER AZA1246
The AZA1246 AZALAB Air Bag Trainer is a comprehensive educational training platform designed to demonstrate the structure, operation, diagnostics, and fault analysis of modern automotive airbag systems, also known as Supplemental Restraint Systems (SRS). Built using OEM automotive components, this trainer delivers a realistic learning experience while maintaining complete operational safety.
This system is ideally suited for automotive engineering colleges, ITIs, polytechnic institutes, vocational training centers, and service technician programs, enabling both theoretical instruction and hands-on diagnostics practice.
ALTERNATOR TRAINER AZA1247
The AZA1247 AZALAB Alternator Trainer is a hands-on automotive electrical training system designed to demonstrate the working principles, construction, and diagnostics of an automotive alternator with external voltage regulation. Built using OEM automotive components, this trainer provides a realistic and safe learning platform for students, technicians, and trainees to understand vehicle charging systems in depth.
This system is ideal for automotive engineering institutes, ITIs, polytechnics, vocational training centers, and service technician programs, supporting both theoretical instruction and practical experimentation.
ARC WELDING MACHINE AZA1234
The AZA1234 Arc Welding Machine by A Z A Lab is a high-performance industrial welding solution engineered for demanding fabrication, maintenance, and structural welding applications. Designed using advanced inverter technology, this machine delivers superior arc stability, high efficiency, and reliable welding performance across a wide range of electrode types and materials.
With an inverter frequency of up to 20 kHz, the AZA1234 ensures fast dynamic response, reduced spatter, and excellent weld bead appearance. Its robust electrical design supports a high duty cycle, allowing continuous operation under heavy loads while maintaining consistent welding output—even with output cable lengths of up to 100 meters.
AUOTFLASH AUTOMATED ABEL FLASH POINT ANALYZER AZA1277
The AutoFlash-1277 (Model: AZA1277) from AZA Lab is a fully automated, microcontroller-based Abel Flash Point Analyzer designed for accurate, safe, and repeatable determination of flash points of combustible liquids. Engineered to meet stringent international testing requirements, this advanced instrument conforms to IP 170, ISO 13736, and IS 1448 (Part 20) standards.
Covering a standard temperature range of –30°C to 70°C, extendable up to 110°C, the AZA1277 is ideally suited for laboratories involved in petroleum testing, petrochemical quality control, fuels research, and regulatory compliance.
AUTODIST-86 GLASS DISTILLATION UNITAZA1282
The AutoDist-86 Glass Distillation Unit (Model AZA1282) is a high-performance laboratory water distiller designed for the continuous production of high-purity distilled water.
Constructed entirely from borosilicate glass 3.3, the unit ensures zero metallic contamination, excellent thermal resistance, and long operational life. It is ideal for laboratories requiring consistent, low-conductivity distilled water for analytical, pharmaceutical, and research applications.Distillation Performance
- Distillate Output: Up to 4 L/hour (±10%)
- Suitable for routine and medium-scale laboratory demand
- Efficient removal of:
- Dissolved salts
- Heavy metals
- Organic/inorganic impurities
- Microbial contaminants
Related products
AGGREGATE CRUSHING VALUE APPARATUS AZA0982
Key Features
- Measures crushing strength of coarse aggregates
- Conforms to IS:2386 (Part IV) and BS 812 standards
- Precision-machined steel cylinder and plunger
- Heavy-duty, corrosion-resistant construction
- Supplied with complete accessories for immediate testing
DEVEL ATTRITION TESTER AZA0989
Key Applications
- Road and highway material testing
- Railway ballast quality assessment
- Concrete mix design durability testing
- Civil engineering research & academic laboratories
LABORATORY PULVERIZER AZA0991
Key Applications
- Cement laboratories – clinker & cement grinding
- Soil and geotechnical labs – fine soil preparation
- Mining & metallurgy – ore and mineral pulverizing
- Construction material testing – mortar & concrete sample prep
- Agricultural and environmental labs
SAMPLE SPLITTER AZA0981
Key Features
- Accurately splits bulk aggregates into representative samples
- Multiple slot options for different particle sizes
- Heavy-duty powder-coated steel frame
- Uniform chute spacing for even material distribution
- Supplied with two sturdy collection pans
- Portable and easy to operate
SHAPE INDEX CALIPER AZA0974
The AZA0974 Shape Index Caliper is a precision hand-held measuring instrument designed to evaluate the shape index of coarse aggregates by measuring their flakiness and elongation values. It is an essential tool in construction material testing, helping laboratories and site engineers ensure that aggregates meet dimensional and performance standards as per IS 2386 (Part I).
Key Features
-
Evaluates shape index of coarse aggregates
-
Measures both flakiness and elongation characteristics
-
Durable stainless steel / hardened steel construction
-
Precision engraved measuring scale
-
Ergonomic, easy-to-handle manual design
-
Suitable for laboratory and on-site field use
-
Fully compliant with IS 2386 (Part I)
SPECIFIC GRAVITY AND WATER ABSORPTION OF AGGREGATES AZA0979
Key Features
- Comprehensive apparatus for specific gravity and water absorption testing
- Suitable for both fine and coarse aggregates
- Heavy-duty, corrosion-resistant construction
- High accuracy and repeatable results
- User-friendly configuration for lab and field use
THICKNESS GAUGE AZA0970
The AZA0970 Thickness Gauge is a precision measuring instrument designed for accurate thickness measurement of coatings, films, metals, plastics, rubbers, and painted surfaces. Engineered for laboratory and industrial applications, this compact and reliable device ensures consistent quality control, compliance with standards, and improved material performance across multiple industries.
Key Features
-
High-precision thickness measurement for laboratory and field use
-
Suitable for metals, films, plastics, rubber, and paint coatings
-
Available in analog dial and digital LCD display models
-
Lightweight, compact, and portable design
-
Fast response time with stable, repeatable readings
-
Easy zeroing and calibration mechanism
TIG Welding Machine AZA 1235
- TIG welding machine for precise, clean welds
- Dual voltage input (110V/220V) for flexibility
- Advanced IGBT inverter technology
- Digital LCD display for accurate settings
- Ideal for steel, stainless steel, and aluminum
- Overheat and overload protection
- Lightweight and portable for field use
- Model: AZA 1235 – designed for professional use