Untitled design – 2025-12-15T163413.092
Click to enlarge
Untitled design – 2025-12-15T163413.092
SOIL CONE PENETROMETER AZA0851
Back to products
Untitled design – 2025-12-17T164405.068
LIQUID LIMIT DEVICE WITH COUNTER AZA0853

SEMI AUTOMATIC CONE PENETROMETER AZA0852

The AZA0852 Semi Automatic Cone Penetrometer from AZALAB is a precision-engineered laboratory instrument used for determining the liquid limit and consistency characteristics of fine-grained soils. Designed to eliminate operator-dependent errors, this semi-automatic model ensures uniform cone release and repeatable penetration results, making it an ideal choice for geotechnical, civil engineering, and construction material testing laboratories.

The apparatus conforms to IS 2720 (Part 5) and BS 1377 standards and is widely used for soil classification, foundation assessment, and settlement analysis. Its semi-automatic clutch-based drop mechanism allows the cone to penetrate the soil sample under controlled conditions for a fixed duration of 5 seconds, ensuring consistent and reliable test outcomes.

Principle of Operation

A soil paste prepared at known moisture content is placed in the sample cup. The standardized cone, attached to a calibrated weight, is released using the semi-automatic clutch mechanism, allowing free fall penetration into the soil. After the specified time (typically 5 seconds), the penetration depth is measured using a high-precision dial gauge.

The moisture content corresponding to a penetration of 20 mm is considered the liquid limit of the soil, as defined in IS and BS standards.

View Specification PDF
Enquiry on WhatsApp
Category:
Description

Description

Key Features and Advantages

  • Semi-Automatic Operation: Eliminates manual release errors and improves repeatability

  • Uniform Cone Drop: Controlled clutch mechanism ensures consistent penetration

  • High Accuracy Measurement: Precision dial gauge with fine resolution

  • Robust Construction: Heavy-duty cast iron base for stability

  • No Power Requirement: Fully mechanical operation

  • Laboratory & Field Ready: Compact, durable, and easy to operate

Standards Compliance

  • IS 2720 (Part 5) – Liquid Limit determination of soils

  • BS 1377 – Methods of test for soils for civil engineering purposes

Applications

  • Liquid limit determination of cohesive soils

  • Soil consistency and strength evaluation

  • Geotechnical site investigations

  • Foundation and pavement design studies

  • Settlement and bearing capacity analysis

  • Academic and research laboratories

Technical Specifications

Feature Specification
Model AZA0852
Operation Semi-automatic cone release with clutch
Penetration Range 0 – 25 mm
Least Count 0.01 mm
Cone Angle 30° (as per IS 2720 Part 5)
Cone Weight 148 g
Additional Weights 50 g & 100 g (included)
Drop Time 5 seconds (preset)
Dial Gauge Precision mechanical, 0.01 mm resolution
Base Cast iron with anti-slip feet
Power Supply Not required
Application Liquid limit & soil consistency testing
Brand AZALAB

Supplied With

  • Semi automatic cone penetrometer frame

  • Standard stainless steel penetration cone

  • 50 g and 100 g additional weights

  • Preset counter / timer mechanism

  • Measuring cup

  • Operating manual (on request)

Frequently Asked Questions (FAQ)

Q1: What is the main use of the AZA0852 cone penetrometer?
It is used to determine the liquid limit and consistency of fine-grained soils.

Q2: How does the semi-automatic mechanism improve accuracy?
It ensures uniform cone release and penetration time, reducing operator variability.

Q3: Does this equipment require electricity?
No. It operates using a mechanical clutch and does not require power.

Q4: Is it suitable for field testing?
Yes. Its compact and rugged design makes it suitable for both laboratory and site use.

Q5: Which soils can be tested using this device?
It is ideal for cohesive soils such as clay, silt, and fine-grained materials.

Additional information

Additional information

Penetration Scale

0–25 mm with 0.01 mm least count
Base Material

Cast iron base with anti-slip feet
Power Supply

Not required (manual mechanism)

You may also like…

BLAINE’S AIR PERMEABILITY APPARATUS AZA0787

The AZA0787 Blaine Air Permeability Apparatus is intended for determining the specific surface area (fineness) of cement by the air-permeability method. The apparatus shown includes a blue supporting body, glass measuring components, graduated scale and associated connections.
Read more
Quick view

CEMENT SAMPLER AZA0786

The AZA0786 Cement Sampler is a manually operated brass sampling tool designed to collect cement from bags. Its sharp angular tube end allows insertion into cement bags, while the wooden handle provides a comfortable grip. The sampler has an approximately 53 cm brass tube with a 2.8 cm internal diameter, an overall length of approximately 73 cm and a small air hole near the handle. Nominal sample volume per collection is approximately 300 cm³.
Read more
Quick view
Untitled design – 2025-12-09T131838.819

FLOW TABLE AZA0791B

  • Measures mortar and concrete flow and workability
  • Manual drop mechanism for reliable consistency testing
  • Built as per IS 1199 and ASTM C230 specifications
  • Includes mould, table, handle, and drop cam
  • Used in site QC, R&D, and cement lab applications
Read more
Quick view
Untitled design – 2025-11-14T160828.823

SHRINKAGE BAR MOULD AZA0794

  • Used for testing drying shrinkage of cement
  • Conforms to IS 4031 and ASTM C490 standards
  • Made from heavy-duty mild steel or gunmetal
  • Precision-ground surfaces for accurate length measurement
  • Includes end reference points for comparator use
  • Supplied with base plate and steel inserts
Read more
Quick view

VICAT NEEDLE APPARATUS WITH DASHPOT AZA0788

The AZA0788 Vicat Needle Apparatus with Dashpot consists of a metallic frame with a freely movable rod and cap, a Vicat mould, a glass base plate, and a set of needles and plunger. The dashpot facilitates gentle lowering of the needle assembly during testing. KEY FEATURES
    • Metallic frame with freely movable rod and top cap
    • Dashpot arrangement for gentle lowering of needles
    • Supplied with initial-setting needle, final-setting needle and consistency plunger
    • Vicat mould and glass base plate included
Read more
Quick view
Untitled design – 2025-11-14T161826.245

VOLUME CHANGE APPARATUS AZA0796

  • Precision apparatus for measuring soil volume change
  • Ideal for CD and CU triaxial testing
  • Manual and digital versions available
  • Durable lab-grade stainless steel build
  • Fully compliant with IS and ASTM standards
  • Provided with all necessary accessories
  • Backed by Azalab’s quality assurance and support
Read more
Quick view

    Related products

    Untitled design – 2025-12-17T185224.461

    AUTOMATIC SOIL COMPACTOR AZA0867

    The AZA0867 Automatic Soil Compactor from Azalab is a precision-engineered laboratory machine designed to perform Standard Proctor and Modified Proctor compaction tests with high repeatability and minimal operator dependency. The system mechanizes the hammer lifting and dropping process, ensuring consistent compaction energy in strict accordance with international standards. This apparatus is essential for geotechnical laboratories involved in road construction, airfield pavements, embankments, earth dams, and foundation engineering, where accurate determination of Maximum Dry Density (MDD) and Optimum Moisture Content (OMC) is critical for quality control and design validation.
    Read more
    Quick view
    Untitled design – 2025-12-17T184815.578

    HEAVY COMPACTION TEST AZA0866

    The AZA0866 Heavy Compaction Test Set from Azalab is designed for determining the Maximum Dry Density (MDD) and Optimum Moisture Content (OMC) of soils using the Heavy Compaction (Modified Proctor) Method, in accordance with IS 2720 (Part VIII). This test is fundamental in geotechnical engineering, road and highway construction, foundation design, embankment works, and earthworks where soils are subjected to high compactive effort. The heavy compaction test realistically simulates field compaction achieved by modern construction equipment, enabling reliable prediction of soil behavior under service loads. This configuration is supplied with a 150 mm diameter mould (2250 cc volume), making it particularly suitable for coarse-grained and granular soils. Scope of Use The AZA0866 Heavy Compaction Test Set is used to establish the relationship between moisture content and dry density of soil under heavy compaction energy. The resulting compaction curve is used to determine MDD and OMC, which are essential parameters for compaction control and quality assurance in field construction.
    Read more
    Quick view
    Untitled design – 2025-12-17T191034.877

    PROCTOR NEEDLES (SPRING TYPE) AZA0868

    The AZA0868 Precision Proctor Needles (Spring Type) from Azalab are designed for rapid, on-site estimation of soil compaction and moisture condition. This portable instrument provides a practical alternative to full laboratory Proctor testing for preliminary assessment and quality control, particularly on cohesive and semi-cohesive soils encountered in embankments, subgrades, and trench backfills. The instrument employs a calibrated, spring-loaded plunger to measure penetration resistance directly (0–40 kg range). Two graduated stems allow accurate tracking of penetration depth, while a comprehensive set of interchangeable needle tips enables testing across a range of soil densities and particle characteristics.
    Applications
    • Field assessment of soil compaction
    • Estimation of optimum moisture condition
    • Subgrade, fill, and trench inspection
    • Construction quality control checks
    • Geotechnical and educational field investigations
    Read more
    Quick view
    Untitled design – 2025-12-17T170633.327

    SAND EQUIVALENT TEST SET AZA0859

    The AZA0859 Sand Equivalent Test Set from AZA Lab is a standardized laboratory and field testing apparatus used to determine the relative proportion of sand versus clay-like or plastic fines in fine aggregates and granular soils. This test is critical in construction quality control where aggregate cleanliness directly affects the performance of asphalt pavements, concrete mixes, and base course layers. The test set conforms to ASTM D2419, IS 2720 (Part 37), and AASHTO T176, ensuring accurate, repeatable, and specification-compliant results. The Sand Equivalent Value (SEV) provides a simple numerical indication of aggregate quality by comparing the height of settled sand to the height of clay suspension after sedimentation.
    Working Principle A prepared fine aggregate sample is placed in a graduated cylinder and mixed with a standard calcium chloride-based solution. After agitation and a controlled settling period, heavier sand particles settle at the bottom while lighter clay and silt particles remain in suspension. The Sand Equivalent Value (SEV) is calculated as: SEV = (Height of Sand / Height of Clay Suspension) × 100 Higher SEV values indicate cleaner aggregates with lower clay contamination, which are preferred for structural and pavement applications.
    Read more
    Quick view
    shrinkage limit set

    SHRINKAGE LIMIT SET AZA0849

    The AZA0849 Shrinkage Limit Set from AZALAB is a precision-engineered laboratory instrument used for determining the shrinkage limit of cohesive soils, a critical parameter within the Atterberg limits framework. This test plays a vital role in understanding the volume change characteristics of fine-grained soils when subjected to drying. The shrinkage limit represents the maximum moisture content at which further reduction in water content does not cause any appreciable decrease in soil volume. Beyond this point, air begins to enter the soil voids, and the soil mass maintains a constant volume. Accurate determination of this parameter is essential for predicting soil behavior in foundations, embankments, earth dams, and pavement structures.

    Standards Compliance

    The AZA0849 Shrinkage Limit Set conforms to major national and international testing standards, ensuring reliable and universally accepted test results:
    • IS 2720 (Part VII)
    • ASTM D427
    • BS 1377
    • AASHTO T 92
    Read more
    Quick view
    Untitled design – 2025-12-15T163413.092

    SOIL CONE PENETROMETER AZA0851

    The AZA0851 Precision Cone Penetrometer from AZALAB is a high-accuracy laboratory instrument designed for determining the liquid limit of fine-grained soils using the cone penetration method. The apparatus fully complies with IS 2720 (Part 5) and ASTM D4318, making it suitable for standardized soil classification and geotechnical investigations. Unlike the Casagrande method, the cone penetrometer provides a more objective and repeatable measurement of liquid limit by correlating soil consistency to the depth of penetration of a standardized cone under its own weight. This method is widely preferred in modern soil mechanics laboratories due to reduced operator dependency and higher precision.

    Principle of Operation

    A soil paste prepared at a known moisture content is placed in the sample cup. The stainless steel cone, of specified mass and angle, is allowed to penetrate the soil freely for 5 seconds. The depth of penetration (up to 20 mm) is measured using a precision depth gauge. The moisture content corresponding to 20 mm penetration is defined as the liquid limit of the soil.

    Standards Compliance

    • IS 2720 (Part 5) – Determination of liquid and plastic limits
    • ASTM D4318 – Liquid Limit, Plastic Limit, and Plasticity Index of Soils
    Read more
    Quick view
    Untitled design – 2025-12-17T193345.667

    SPEEDY MOISTURE ZI 3027 METER (D2 LARGE) AZA0873

    The AZA0873 Speedy Moisture ZI 3027 Meter (D2 Large) from Azalab is a high-performance field instrument designed for rapid and accurate determination of moisture content in soils, aggregates, sand, and similar materials. Based on the proven calcium carbide gas pressure method, this instrument is widely used in earthwork compaction control, road construction, geotechnical investigations, and concrete production, where immediate moisture data is critical for quality assurance.

    The D2 Large configuration distinguishes the AZA0873 by allowing a larger sample size, providing more representative and reliable results, especially for heterogeneous materials and aggregates with larger particle sizes. Its rugged ZI 3027 construction ensures dependable performance under demanding site conditions.

    Read more
    Quick view
    Untitled design – 2025-12-17T192222.252

    WATER LEVEL INDICATOR AZA0871

    The AZA0871 Water Level Indicator from Azalab is a high-precision electronic instrument designed for accurate measurement of groundwater levels in boreholes, wells, standpipes, and observation tubes. It is an essential tool for professionals involved in groundwater monitoring, environmental site assessments, hydrological investigations, geotechnical projects, and dewatering operations.

    Accurate water level measurement is fundamental for understanding aquifer behavior, monitoring seasonal or pumping-induced fluctuations, assessing contamination plumes, and supporting the design of foundations, irrigation systems, and water resource management plans. The AZA0871 provides a reliable, fast, and field-ready solution for both static and dynamic water level measurements.

    Read more
    Quick view