Rock
Aggregate
Cement
Concrete
Soil
Steel
Bitumen/Asphalt
Security Survey Equipment
General Items
MOISTURE TINS AZA1049
AZA1049 Moisture Tins from Azalab are precision laboratory containers specifically designed for the determination of moisture (water) content in soils, aggregates, powders, and other granular materials. These tins are a fundamental accessory in geotechnical, civil engineering, construction material, and academic laboratories, where accurate moisture measurement is essential for reliable test results.
Manufactured from lightweight aluminum or corrosion-resistant stainless steel, AZA1049 moisture tins are engineered to withstand repeated heating cycles, handling, and long-term laboratory use without deformation or loss of dimensional stability.
Description
Moisture content determination is a critical step in evaluating the engineering properties of soils, including compaction behavior, shear strength, permeability, and classification. In accordance with standard testing procedures, soil samples are placed in moisture tins, weighed, oven-dried at 105°C to 110°C, and weighed again to calculate the percentage of water loss.
AZA1049 moisture tins feature a flat-bottom design to ensure uniform heat distribution during oven drying, and tight-fitting lids that minimize moisture exchange during sample storage, transport, and weighing. The seamless metal construction prevents sample leakage, absorption, or contamination, ensuring high repeatability and accuracy in moisture content calculations.
Standards Compliance
AZA1049 Moisture Tins are manufactured to meet the requirements of:
- ASTM D2216 – Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil
- IS: 2720 (Part 2) – Determination of Water Content
These standards make AZA1049 suitable for government labs, consultancy firms, contractors, and educational institutions.
Key Features
- Corrosion-resistant aluminum or stainless steel construction
- Seamless body prevents moisture absorption or sample loss
- Flat bottom for uniform oven heating
- Tight-fitting lids to prevent contamination and moisture exchange
- Numbered lids and bases for easy sample identification
- Stackable and space-efficient design
- Durable under repeated heating and cooling cycles
- Suitable for soil, powder, and granular material testing
Typical Applications
- Geotechnical and soil testing laboratories
- Civil engineering and construction quality control
- Field and site laboratories
- Academic and research institutions
- Aggregate, powder, and granular material testing
Technical Specifications
| Parameter | Description |
|---|---|
| Model | AZA1049 |
| Material | Aluminum / Stainless Steel |
| Diameter Range | 50 mm to 100 mm |
| Height / Depth | 20 mm to 50 mm |
| Capacity | Approx. 30 ml to 150 ml |
| Lid Type | Snap-fit / Threaded (model dependent) |
| Finish | Smooth, polished, non-reactive surface |
| Temperature Resistance | Up to 150°C |
| Standards Compliance | ASTM D2216, IS: 2720 (Part 2) |
| Usage | Moisture content determination of soils and granular materials |
Handling, Cleaning & Maintenance
- Clean with mild detergent and water after use
- Dry thoroughly before reuse to avoid corrosion
- Avoid use with highly corrosive materials unless stainless steel is selected
- Store in a clean, dry environment or laboratory oven
Frequently Asked Questions (FAQ)
Q1: What are moisture tins used for?
They are used to determine the moisture content of soil by measuring the mass difference before and after oven drying.
Q2: What sizes are available?
AZA1049 tins are available in diameters from 50 mm to 100 mm, with varying depths to suit different sample volumes.
Q3: Can these tins be reused?
Yes. They are fully reusable and designed for long-term laboratory use.
Q4: Do these comply with ASTM and IS standards?
Yes. AZA1049 complies with ASTM D2216 and IS: 2720 (Part 2).
Q5: Which material should I choose—aluminum or stainless steel?
Aluminum is lightweight and economical for routine soil testing, while stainless steel is recommended for reactive or acidic samples.
Why Choose AZA1049 from Azalab?
- Proven design for accurate moisture determination
- Compliance with international and Indian standards
- Durable construction for repeated oven use
- Suitable for laboratories, sites, and institutions
- Backed by Azalab’s quality assurance and technical expertise
Additional information
| Material |
Aluminum / Stainless Steel |
|---|---|
| Diameter Range |
50 mm to 100 mm |
| Height/Depth |
20 mm to 50 mm |
| Capacity |
30 ml to 150 ml |
You may also like…
3D Printer AZA1255
The AZA1255 AZALAB 3D Printer is a high-precision, versatile additive manufacturing system engineered for educational institutions, research laboratories, professional design studios, and industrial prototyping environments. Designed to deliver speed, accuracy, and repeatability, this advanced 3D printer is ideal for producing functional prototypes, detailed models, custom components, architectural parts, and educational aids.
Combining robust mechanical design with intelligent control software, the AZA1255 ensures consistent, high-quality output across a wide range of applications.
Abrasion Testing Machine for Glazed Tiles AZA1262
The AZA LAB Abrasion Testing Machine for Glazed Tiles (AZA1262) is a robust, high-performance laboratory instrument engineered for precise and high-speed abrasion resistance testing of glazed ceramic tiles. Fully compliant with BIS 13630-11 and EN ISO 10545-7, this machine is designed to ensure reliable evaluation of tile durability under simulated real-world wear conditions.
With the capability to test up to four specimens simultaneously, the AZA1262 significantly improves testing efficiency while maintaining exceptional accuracy and repeatability—making it ideal for tile manufacturers, certification laboratories, and quality control departments
Air Bag Trainer AZA1246
The AZA1246 AZALAB Air Bag Trainer is a comprehensive educational training platform designed to demonstrate the structure, operation, diagnostics, and fault analysis of modern automotive airbag systems, also known as Supplemental Restraint Systems (SRS). Built using OEM automotive components, this trainer delivers a realistic learning experience while maintaining complete operational safety.
This system is ideally suited for automotive engineering colleges, ITIs, polytechnic institutes, vocational training centers, and service technician programs, enabling both theoretical instruction and hands-on diagnostics practice.
Alternator Trainer AZA1247
The AZA1247 AZALAB Alternator Trainer is a hands-on automotive electrical training system designed to demonstrate the working principles, construction, and diagnostics of an automotive alternator with external voltage regulation. Built using OEM automotive components, this trainer provides a realistic and safe learning platform for students, technicians, and trainees to understand vehicle charging systems in depth.
This system is ideal for automotive engineering institutes, ITIs, polytechnics, vocational training centers, and service technician programs, supporting both theoretical instruction and practical experimentation.
Arc Welding Machine AZA1234
The AZA1234 Arc Welding Machine by A Z A Lab is a high-performance industrial welding solution engineered for demanding fabrication, maintenance, and structural welding applications. Designed using advanced inverter technology, this machine delivers superior arc stability, high efficiency, and reliable welding performance across a wide range of electrode types and materials.
With an inverter frequency of up to 20 kHz, the AZA1234 ensures fast dynamic response, reduced spatter, and excellent weld bead appearance. Its robust electrical design supports a high duty cycle, allowing continuous operation under heavy loads while maintaining consistent welding output—even with output cable lengths of up to 100 meters.
Closed Cup Flash Point Tester AZA1280
The AZA1280 Closed Cup Flash Point Tester from AZA Lab is a high-performance, fully automated instrument designed for accurate determination of flash points of volatile and combustible liquids using the Tag Closed Cup (TCC) method, in full compliance with ASTM D56 standards.
This analyzer is specifically intended for liquids with flash points below 93°C (200°F) and low viscosity samples, making it an essential tool for petroleum laboratories, fuel testing facilities, quality control departments, and R&D centers requiring high precision at low and sub-zero temperatures.
Related products
DAILY RAIN GAUGE AZA1080
The Daily Rain Gauge is a fundamental precipitation measuring instrument used in meteorology, environmental laboratories, agriculture, hydrology, and educational weather stations. Designed for simplicity, accuracy, and durability, AZA1080 by AZALAB enables precise manual measurement of daily rainfall over fixed observation periods, typically 24 hours.
Manufactured from transparent, UV-resistant polycarbonate, this rain gauge provides excellent visibility of collected rainfall while withstanding prolonged outdoor exposure. Clearly graduated markings in millimeters (mm) ensure accurate and repeatable readings, making it suitable for both scientific monitoring and instructional use.
DIGITAT VERNIER CALIPER AZA1079
The Digital Vernier Caliper is a high-precision dimensional measuring instrument widely used in laboratories, engineering workshops, industrial inspection, and research environments. Combining the proven mechanical accuracy of a traditional vernier caliper with the speed and clarity of a digital LCD display, AZA1079 by AZALAB delivers fast, reliable, and repeatable measurement results.
Manufactured from hardened stainless steel, this digital caliper is corrosion-resistant, wear-resistant, and designed for long-term laboratory and industrial use. It is ideal for accurately measuring internal dimensions, external dimensions, depths, and step measurements where precision directly impacts testing outcomes or product quality.
ELECTRONIC THERMOMETER AZA1075
The Electronic Thermometer is a fast-response, high-accuracy temperature measuring instrument widely used across laboratory, industrial, pharmaceutical, medical, HVAC, and food safety environments. Designed with advanced electronic sensing technology and a clear digital display, it delivers reliable and repeatable temperature readings within seconds.
The AZA1075 Electronic Thermometer from AZALAB is engineered for precision, durability, and ease of use. Available in contact probe-based and non-contact infrared (IR) configurations, it supports a wide range of applications—from direct immersion in liquids to hygienic surface temperature measurement.
HEAVY DUTY BALANCE AZA1089
The AZA1089 Heavy Duty Balance is a high-capacity digital industrial weighing scale engineered for laboratories and production environments that require accurate weighing of large, bulky, or heavy materials. Designed for durability, stability, and precision, this balance is widely used in quality control labs, manufacturing plants, R&D facilities, cement and concrete labs, agriculture, and material testing environments.
Built to handle demanding workloads, the AZA1089 combines a robust mechanical structure with reliable electronic measurement, delivering consistent and repeatable results even under high-load conditions.
RUBBER TUBING AZA1082
Laboratory Rubber Tubing is a critical flexible connector used extensively in chemical, biological, analytical, and industrial laboratories for the safe transfer of gases, liquids, and low-pressure fluids between apparatus. AZA1082 by AZALAB is engineered for durability, elasticity, and chemical resistance, ensuring reliable performance in demanding laboratory environments.
Manufactured from premium-grade natural or synthetic laboratory rubber, this tubing offers excellent tensile strength, flexibility, and resilience while maintaining a chemically inert inner surface to prevent contamination of samples. Its smooth internal bore ensures uninterrupted flow, while the abrasion-resistant outer surface withstands repeated bending, clamping, and handling.
STANDS, BOSSHEADS AND CLAMPS AZA1052
Azalab Laboratory Stands, Bossheads, and Clamps AZA1052 are precision-engineered support accessories designed to securely hold laboratory glassware and instruments during routine and advanced experiments. These components form the backbone of safe and stable laboratory setups, commonly used for titration, heating, distillation, filtration, reflux, and general apparatus support.
Manufactured using corrosion-resistant metals such as powder-coated mild steel, chrome-plated steel, die-cast alloys, and stainless steel, AZA1052 components deliver long service life even in chemically aggressive laboratory environments.
TRIPLE BEAM BALANCE AZA1088
The AZA1088 Mechanical Triple Beam Balance is a robust, electricity-free laboratory weighing instrument designed for accurate mass measurement of solids, powders, and containers. It is widely used in chemistry, biology, agricultural, and educational laboratories, as well as in field testing environments where digital balances may be impractical or unreliable.
This balance is a time-tested analog weighing solution, valued for its durability, repeatability, and simplicity of operation. With no requirement for batteries or external power, it delivers dependable performance in classrooms, research labs, and remote locations.
UNIVERSAL WATER BATH (SEROLOGICAL TYPE) AZA1055
The AZA1055 Universal Water Bath (Serological Type) from AZALAB is a precision laboratory instrument designed to provide stable, uniform, and accurate temperature control for a wide range of biological, chemical, and diagnostic applications. Specifically engineered for serological and routine laboratory work, it ensures reliable performance in applications where temperature consistency is critical for reproducible results.
This laboratory water bath is widely used in clinical laboratories, research institutes, pharmaceutical facilities, educational institutions, and industrial labs for incubation, thawing, media warming, enzyme reactions, and serological testing.
