Rock
Aggregate
Cement
Concrete
Soil
Steel
Bitumen/Asphalt
Security Survey Equipment
General ItemsProducts
- Laboratory Chemicals0 products
- Glassware0 products
- Material Testing Equipment384 products
- Petroleum Testing Equipment0 products
- Pharmaceutical & Micro Biological Testing Equipment4 products
- Tiles & Ceramics Testing Equipment5 products
- Educational Testing Equipment63 products
- Electronics Engineering Laboratory Equipments0 products
- Mechanical Engineering Lab Equipment63 products
- Applied mechanics lab equipments0 products
- Automobile engineering Lab equipment10 products
- CAD and CAM Lab Equipment and Softwares2 products
- Dynamics of Machine Lab Equipment0 products
- Fluid Mechanics Lab Equipment0 products
- Fuel Testing Lab Equipment0 products
- Heat and Mass Transfer lab equipment0 products
- Measurement Lab Equipment0 products
- Refrigeration & Air conditioning Lab Equipment0 products
- Robotics and Mechatronics lab equipment0 products
- Thermal Engineering lab Equipment0 products
- Tourbo Machinery Lab Equipment0 products
- Various Engineering Models, Charts and Accessories0 products
- Workshop Machines and Tools51 products
- Medical and Nurse Training Lab Models0 products
- General Laboratory Testing Equipment0 products
- Laboratory Furniture0 products
Showing 13–24 of 456 results
AZA 0790 GILLMORE NEEDLE APPARATUS
ASTM C 266
This instrument is used for determining the time setting of hydraulic cement.
Specification:
A base with a Vertical shaft and Two horizontal arms. The lower arms is adjustable for height. 1 no. Initial needle 1/12-inch dia 1⁄4 lb. Wt. 1 no. Final needle 1/24-inch dia. 1⁄4 lb. Wt. 1 no. Glass base plate. Complete as above.
AZA 0791 FLOW TABLE
IS:6932 (PART VIII), ASTM C 230, BS 4551:1
Flow Table is used for determining the work-ability of building limes.
Specification:
The flow table consists of a 30 cm dia polish steel plate with 3 engraved annular circles 7, 11 and 19cm dia. The table top is arranged for a free fall of 12.5mm by a cam action. Supplied complete with one brass conical mould, 65mm i.d. at base and 40mm i.d. at top, height of the mould 90mm.
AZA 0792 FLOW TABLE (MOTORISED)
IS 1199-1959, ASTM C-124, AASHTO-T-120.
It is used for determining the flow of cement concrete.
Specification:
Consists of a steel table top 76.2cm (30 inch. Dia) Finely machined. The integral cast ribs are designed for support and strength. The
stand is fabricated out of cast iron and is of study
construction. Holes for mounting in foundations are drilled
in the base plate. The ground and hardened steel cam is
designed to fit and drop the table by 12.5mm. Electrically
operated to raise and drop the table top, approx. 15 times in 15 seconds, Suitable for operation on 230 Volts, 50 cycles, A.C. supply. Supplied with one conical mould with two handles, 12cm height, having 17cm. Inside Dia. at the Top and 25cm inner dia. at the base. Complete with a tamping rod 16mm dia x 600mm long one end rounded.
AZA 0793 FLOW TABLE
IS 5512 & BS 4551-1
This used for measuring the consistency of pozzolana and also cement mortar and hydrated lime.
Specification:
It consists of a machined brass table top 250+/- 2.5mm dia. Mounted on a rigid stand. The table top is reinforced with equally disposed ribs and allowed to conical brass mould 100mm i.d. top dia and 50mm high.
Accessories:
Mild steel plate 25mm thick & 250mm square for fixing to underside of the base.
AZA 0794 FLOW TABLE (MOTORISED)
AZA 0795 LE CHATELIER MOULD
IS269,712,5514,1727,2645,6932(PART IX)BS6463
It is used for the determination of soundness by expansion method of
ordinary and rapid hardening Portland cement , low heat Portland cement
and class 'A' Limes.
Specification:
It consists of a small split cylinder forming a mould. On either side of the split cylinder. Two parallel indicating arms with pointed ends are attached. Supplied complete with two glass plates and a lead weight.
AZA 0796 LE CHATELIER FLASK
IS 4031 1968, ASTM C 188
Specification:
Used for finding specific gravity of hydraulic cement. Made from Borosilicate glass. The flask is 243mm in total height, having a bulb of 90mm dia of 250ml approximate capacity. The long neck of the flask has at top a funnel of 50mm dia in that fits a ground glass stopper. The neck has over-all 11mm i.d. upper portion is graduated from 18ml to 24ml with 1 ml graduation. Just at the bottom of the neck 1 ml capacity is marked in between there is 17 ml capacity bulb.
AZA 0797 SHRINKAGE BAR MOULD
IS 4031, 10086, ASTM C 227. & BS 1881.
The mould is used for casting specimens of cement & aggregate combinations for measuring the potential expansive alkali reactivity. Size of the mould is 25 x 25 x 282 mm and effective size is 25 x 25x 250 mm.
Available Models:
AZA 0797-A - Shrinkage Bar Mould - One Gang (One Compartment)
AZA 0797-B Shrinkage Bar Mould-Two Gang (Two Compartment)
AZA 0797-C Shrinkage Bar Mould - Three Gang (Three Compartment)
AZA 0797-D Shrinkage Bar Mould - Four Gang (Four Compartment)
AZA 0798 LENGTH COMPARATOR
IS 1199-1959, IS 4031 1968 BS 1881, ASTM C 151, C490.
It is used to measure the dying shrinkage of concrete autoclave expansion of Portland cement and potential expansive reactivity of cement aggregate combinations in mortar bars during storage, on self drying.
Specification:
The instrument consists of a channeled or a round base over which two vertical pillars are fixed. An adjustable cross plate is at the top. A dial gauge, reading to .002mm x 5mm. Can be located upon a 6.5mm. dia ball or other reference point cementedinthespecimen.Onthebasethereis similarrecessed seating in which can be placed a second ball or reference point in the specimen.
Complete with a stainless steel standardization bar with insulated grip and with 6.5mm dia. Balls mounted in the ends. The unit can be supplied with an Electronic Dial Gauge at extra cost if indicated at the time of placing the order.
AZA 0799 VOLUME CHANGE APPARATUS
ASTM C 490, IS 4031 & BS 1881.
The instrument is used for determining the volume change of cement concrete.
Specification:
The apparatus comprises of one mould effective gauge length complete with base plate, four reference pins, one length comparator frame, one stainless reference bar with insulated grip, and one dial gauge, 0.002mm x 5mm
AZA 0800 LABORATORY CEMENT AUTOCLAVE
IS 4031-1968, IS 1624-1960 & ASTM C 151, C 141
Specification:
The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless-steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 10.5 cm diameter x 40.5cm height suitable for operation on 230 V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature.
Note: Ordinary laboratory cement autoclave with mild steel chambers are also available.
AZA 0802 DIGITAL BLAINE AIR PERMEABILITY APPARATUS
for the Air Permeability measuring of cement specimen. The testing
conforms with the requirements of ASTM C204, BS 4359-2
Specifications:
Inside diameter of permeability cell φ12.7mm
Height of sample in the cell 15mm
Perforated disk 35
Diameter of the hole 1.0mm
Thickness of disk 1.0mm
Power 220v 50Hz 25w
