J-RING, NARROW GAP AZA1109

The AZA1124 Beam Mould is a precision-engineered mould designed for casting concrete beams used in flexural strength testing. Built with high-grade cast iron or mild steel, this mould ensures accurate geometry, dimensional stability, and repeatable testing results in accordance with IS, ASTM, and BS standards. It is an essential tool for construction material testing laboratories, civil engineering departments, cement quality control labs, and academic institutions conducting structural testing exercises.

---

Purpose & Importance

Flexural strength testing evaluates a concrete beam’s ability to resist bending stress. Standards such as IS 516, ASTM C78, and BS EN 12390-5 specify strict guidelines for specimen dimensions and surface finish. The AZA1124 Beam Mould enables users to produce uniform, high-quality concrete beams with precise cross-sections, ensuring reliability and compliance during flexural strength evaluation.

Beams cast from AZA1124 are used for:

• Flexural tensile strength testing
• Load-bearing capacity studies
• Structural behavior simulations
• R&D on mix designs and reinforcement additives

Ideal for:

• Civil engineering research laboratories
• Cement product quality assurance departments
• Construction material testing centers
• Technical universities and engineering institutions

AZA1112 L Shape Box Apparatus is a precision testing device designed to evaluate the passing ability and flow performance of Self-Compacting Concrete (SCC) in congested reinforcement conditions. This apparatus simulates real-world scenarios such as densely reinforced beams, columns, tunnels, and bridge segments, where concrete must flow freely without segregation or blockage.

The distinctive L-shaped design creates a controlled flow path where freshly mixed SCC moves from a vertical chamber into a horizontal channel containing reinforcement bars. By measuring the concrete heights at both ends (H1 and H2), the H2/H1 ratio is calculated, providing a direct, quantitative assessment of the concrete’s ability to pass through obstructions.

Manufactured from durable, corrosion-resistant steel, AZA1112 is built for long-term laboratory and site use. It conforms to EN 12350-10 and EFNARC guidelines, ensuring global acceptance of test results.

The Azalab Mould Verification Toolset is a precision-engineered quality control kit designed for verifying the dimensional accuracy and geometric tolerances of concrete casting moulds and test specimens. It is an essential instrument set for laboratories conducting routine QC, R&D, and compliance testing in accordance with IS, ASTM, EN, and BS standards. This complete toolset ensures that cube moulds, beam moulds, and cylindrical moulds meet the required tolerances for flatness, perpendicularity, straightness, and dimensional conformity—parameters that directly impact test reliability and reproducibility. Key Capabilities The AZA1121 verification kit allows accurate measurement of:

• Flatness of mould and specimen surfaces
• Straightness along mould edges and specimen sides
• Perpendicularity of internal walls and corners
• Dimensional accuracy (L × W × H, and diameter for cylinders)
• Go/No-Go tolerance checks for standardized cube mould sizes
• Surface deviation & gap measurement using feeler gauges

Each instrument is manufactured using precision-ground stainless steel or hardened, anodized aluminum, ensuring long-term stability and high measurement accuracy.

The AZA1120 Precision Steel Straight Edge is a laboratory-grade tool engineered for leveling, scraping, and finishing concrete and soil specimens during testing procedures. Used extensively in concrete cube/cylinder preparation, slump cone tests, and air meter testing, this straight edge ensures flat, uniform specimen surfaces essential for accurate and repeatable results.

Manufactured from high-grade hardened steel, the AZA1120 offers superior rigidity, dimensional stability, and long-term durability. The flat, 1-inch wide, 12-inch long bar profile allows smooth handling and effortless removal of excess material from molds. A corrosion-resistant polished or matte finish further enhances longevity and reliability in both lab and field conditions.